Espusta Cerium Oxide Glass Polish Kit — 78mm & 25mm Pads, DIY car windscreen scratch remover

Espusta Cerium Oxide Glass Polish Kit is a compact, professional-grade repair set that restores clarity to scratched car glass, mirrors, windshields and headlights using soft cerium oxide and wool polishing tools.

Small chips, wiper marks and light scratches on automotive glass can scatter light and reduce visibility. This Espusta kit pairs high-quality cerium oxide powder with soft wool and foam polishing attachments sized for handheld and power-tool use, providing a chemical-mechanical polish that improves smoothness and optical clarity without aggressive abrasion. The kit is designed for DIY car care enthusiasts and detailers who want a targeted solution for glass blemishes without replacing the entire pane.

How does the kit remove light scratches on windshields and windows?

The cerium oxide works as a glass-specific polishing compound while the wool and foam pads concentrate mechanical action on the damaged area. When mixed with water to a workable paste and applied with steady pressure, the combination smooths and brightens the surface. It is best for shallow surface scratches rather than deep gouges or cracks.

• Mix powder with water to form a paste for controlled polishing
• Use the included 78mm polishing pad for windshields and larger areas
• Polish with circular motions until scratches visibly diminish
• Finish with the smaller 25mm wool wheel for tight spots and edges

What surfaces and blemishes is this kit suitable for?

Espusta’s kit is formulated for glass surfaces: automotive windshields, side and rear windows, mirrors and headlight cover glass. It tackles fine scratches, scuff marks left by wipers, and light water stain deposits; it is not intended to repair structural cracks or heavily pitted glass.

• Windshields and side windows with light surface scratches
• Interior and exterior mirrors with scuffs
• Clear headlight lenses made from glass (not plastic) for minor haze removal
• Glass fixtures and small architectural panes with superficial marks

How do I use the Espusta cerium oxide kit safely and effectively?

Prepare a small paste by mixing the cerium oxide powder with water, apply it to the polishing pad, and work the damaged area with moderate pressure. Keep the surface and pad slightly wet during polishing to avoid overheating; clean and inspect frequently to judge progress and avoid over-polishing one spot.

• Create a paste: a few drops of water per pinch of powder
• Start slow: low-speed rotary or hand polishing to control removal
• Keep area lubricated to prevent heat build-up and streaking
• Rinse and wipe clean, then inspect in daylight for remaining haze

Who should consider this kit: DIY motorists, mobile detailers and maintenance pros who encounter light glass blemishes and want an economical repair option are ideal users. If the glass has deep cracks, large chips, or structural damage, replacement remains the safest choice. For routine upkeep, the Espusta kit gives a practical way to restore clarity, extend the usable life of glass components, and improve overall visibility when used following instructions.