EVERESTWAY 10" Electric Radiator Fans 12V 80W Slim 2.36" Thick Push/Pull Pair with Mounting Kit

EVERESTWAY 10-inch 12V 80W slim radiator fan pair provides high-flow push/pull cooling for 12V vehicle radiators in a compact 2.36-inch thickness design.

These two EVERESTWAY 10" universal electric radiator fans deliver a reversible push/pull configuration with curved six-blade rotors and a rated 80W power draw each. Designed for 12V systems, they produce high airflow (≥800 CFM per fan at up to 2400±10% RPM) while remaining slim enough to fit tight engine bays and auxiliary radiator setups. The kit ships with mounting brackets and tie straps so you can adapt installation to cars, pickups, RVs, trucks and trailers as long as the radiator depth and 10-inch diameter match your vehicle.

How do these fans improve radiator cooling on my vehicle?

The EVERESTWAY fans increase airflow through the radiator core to help dissipate heat from coolant and nearby components more effectively than passive airflow alone. Their curved six-blade design and 80W motor deliver stronger, steady airflow at up to about 9.09 m/s maximum wind speed, supporting faster heat transfer when idling or moving slowly.

• Maximum fan CFM ≥800 per fan for high-volume air movement
• Rated power 80W and amp draw roughly 5–7 amps per fan
• Top rotational speed ~2400±10% RPM for consistent airflow
• Slim 2.36-inch thickness fits constrained radiator areas

Can I use these fans as pushers or pullers and how do I switch modes?

The fans are reversible: they come set in puller mode from the factory but can be converted to pusher operation if needed. To change the airflow direction you flip the blade assembly over and reverse the wiring polarity so the blades rotate the opposite way, allowing placement on either side of the radiator for push or pull configurations.

• Factory default: puller mode (mounted behind the radiator)
• To convert: flip blade orientation and reverse fan wire polarity
• Suitable for single-fan or dual push/pull setups depending on radiator depth

What vehicles and setups are compatible with this universal kit?

These 10-inch fans are compatible with a wide range of 12V vehicles when the radiator diameter and clearance match the fan dimensions. They work well on cars, pickups, SUVs, RVs, light trucks, trailers and many custom cooling projects; always verify the physical fit and electrical capacity before installation.

• Works on most 12V systems: cars, trucks, RVs, pickups, trailers
• Check radiator diameter = 10 inches and available depth ≥2.36 inches
• Mounting kit with brackets and tie straps included for flexible installs

What should I check before buying and installing these fans?

Measure your radiator and engine-bay clearance, confirm a 12V electrical supply able to handle 5–7 amps per fan, and ensure the mounting surface and airflow direction suit your cooling goals. The kit includes basic brackets and tie straps, but some installations may require additional hardware or wiring components for relays, switches or temperature controllers.

• Verify radiator diameter is 10 inches and clearance meets 2.36-inch thickness
• Confirm vehicle electrical system can supply ~5–7 amps per fan
• Plan for wiring: consider relay, fuse, and thermostat or switch for automation

Who this is for: EVERESTWAY’s 10" slim electric radiator fan pair is intended for vehicle owners and DIY mechanics who need higher airflow in confined spaces—ideal for those installing auxiliary or replacement fans on 12V cars, trucks, RVs and trailers. Choose this kit if you need a compact, high-CFM push/pull solution, have basic fabrication or wiring capability, and can confirm the 10-inch size fits your radiator. If you’re uncertain about fit or wiring, consult a mechanic or contact EVERESTWAY support for guidance before purchase.