EVIL ENERGY 3/8 in Marine Fuel Hose 10 ft Type A1-15 Rubber — 300 PSI Low-Permeation

EVIL ENERGY 3/8" Marine Fuel Line Hose Type A1-15 Rubber is a 10-foot, SAE J1527-compliant marine fuel line engineered for boat engines and other marine fuel supply applications.

Built to meet strict marine standards, this 3/8-inch fuel hose combines chemical resistance, reinforcement, and low permeation properties so you can run gasoline, diesel or ethanol-blend fuels with confidence. The hose is constructed with a nitrile-based inner tube, an NBR+PVC outer cover, and a polyester braid reinforcement to deliver durability, flexibility and regulatory compliance for recreational and light commercial marine use.

How does this hose stand up to fuel and weather exposure?

The inner nitrile compound resists degradation from common fuels including gasoline, diesel and E85, while the outer NBR+PVC layer provides UV and weather resistance. Together with the polyester braid, the hose preserves its integrity under marine conditions and reduces permeation losses.

• Compatible with gasoline, diesel and ethanol blends
• Outer cover resists sunlight and salt-spray exposure
• Reinforced braid prevents excessive expansion under pressure

What pressure and temperature limits should I expect?

This fuel line is rated for typical marine operating ranges: a maximum working pressure of 300 PSI and a burst resistance of 900 PSI. It also tolerates cold starts and warm engine bays with an effective temperature window from -20°F to 221°F (-30°C to 105°C).

• Maximum working pressure: 300 PSI
• Burst pressure: 900 PSI
• Temperature range: -20°F to 221°F (-30°C to 105°C)

Does it meet marine and regulatory standards?

Yes — the hose satisfies multiple marine and emissions-related specifications so it can be used in pleasure craft fuel systems. It meets SAE J1527 type A1-15 requirements as well as ISO 7840 type A1, and it aligns with NMMA/CE accepted standards and low-permeation EPA/CARB expectations.

• SAE J1527 type A1-15 compliant
• ISO 7840 type A1 and NMMA/CE accepted
• Engineered for low permeation to comply with EPA and CARB guidance

How do I use and install the 3/8" hose safely?

Cut the hose squarely, choose compatible marine-grade clamps and fittings, and route it away from sharp edges and high-heat surfaces. Inspect hose ends and clamps for secure seals, and replace the hose at first sign of cracking, hardening or fuel smell to maintain safety and performance.

• Use proper marine fuel fittings and stainless clamps
• Keep hose away from exhaust and moving parts
• Perform periodic checks for wear, stiffness or leakage

Who is this for? Boaters, marine repair shops, and DIY enthusiasts who need a reliable, compliant fuel supply line for outboard or stern-drive engines will find this EVIL ENERGY 3/8" Type A1-15 hose suitable. It’s intended for applications requiring low permeation, UV resistance and a durable construction that copes with typical marine temperatures and pressures. If you operate recreational vessels or maintain small marine craft and want a ready-to-install 10-foot length that meets SAE and international standards, this hose is an appropriate choice.