EVIL ENERGY 6x135 Wheel Spacers 2" (87.1mm Hub Bore) Hubcentric 6061-T6 Aluminium, M14x2 Studs

EVIL ENERGY 6x135 2" wheel spacers are hubcentric aluminum spacers designed to safely move your wheels outward for improved clearance and stance on compatible Ford and Lincoln trucks.

These 2-inch, 6x135mm spacers fit vehicles that use an 87.1mm hub bore and M14x2 wheel studs, including many Ford F-150, Expedition, Lincoln Mark LT and Navigator models from the 2003–2014 era. Machined from 6061-T6 billet aluminum and finished with anodizing, they pair with high-strength 10.9 grade geomet bolts to deliver precise fitment and long-term durability.

Will these spacers fit my Ford or Lincoln truck?

Check your vehicle's bolt pattern (6x135), hub bore (87.1mm) and stud thread size (M14x2) before purchase. These spacers are engineered to be hubcentric, reducing runout when matched to the correct hub diameter and bolt pattern.

• Compatible models: Ford F-150 (2004–2014) and Expedition (2003–2014)
• Compatible Lincoln models: Mark LT (2006–2014) and Navigator (2003–2014)
• Bolt pattern: 6x135 mm; hub bore: 87.1 mm; stud thread: M14x2
• Spacer thickness: 2 inches (50.8 mm)

How do these spacers affect driving and clearance?

By moving the wheel outward by 2 inches, the spacers increase track width and create more clearance for larger tires, calipers or suspension components. Properly installed hubcentric spacers maintain wheel alignment characteristics while improving stance and handling predictability in many setups.

• Increases tire-to-fender clearance for larger wheel/tire combos
• Helps avoid rubbing on suspension or brake components
• Can improve visual stance and left/right track width balance
• May require professional wheel balancing after installation

What are these spacers made from and how durable are they?

EVIL ENERGY spacers are CNC-machined from 6061-T6 aircraft-grade aluminum for a strong yet lightweight component. The anodized surface and 10.9 grade geomet bolts resist corrosion and provide high tensile strength to withstand road demands when installed and torqued correctly.

• Material: 6061-T6 billet aluminum with anodized finish
• Hardware: 10.9 grade geomet bolts for improved strength
• Manufacturing: CNC-machined for tight tolerances and hubcentric accuracy
• Designed to resist cracking and deformation under normal driving loads

How should I install and maintain these spacers?

Install the spacer between the hub and wheel following factory torque specifications; manual tightening is recommended for final torque to prevent over-torquing and bolt damage. After any spacer installation, a professional wheel balance and proper re-torque checks are advisable to prevent vibration or safety issues.

• Position spacer on hub bearing, align bolt pattern, install with supplied bolts
• Manually finish torque to spec—avoid only using impact tools for final tightening
• Have wheels professionally balanced post-installation to minimize vibration
• Re-check wheel hardware torque after first 50–100 miles of driving

Who is this for: These EVIL ENERGY 6x135 2" spacers are intended for owners of compatible Ford and Lincoln trucks who need additional clearance for larger tires, upgraded brakes, or a wider stance. They suit DIY enthusiasts and professional installers who value hubcentric accuracy, lightweight strength, and CNC-level tolerances. Note: wheel spacers are an aftermarket modification—verify fitment and consult a professional installer if unsure.