EVIL ENERGY AN10 PTFE Fuel Line Kit 20ft Black — Nylon-Braided, E85/Petrol Compatible, 1/2" ID

This kit supplies a long run of professional-grade PTFE-lined fuel hose wrapped in a durable nylon braid. The line measures 20 ft (6 m) with an inner diameter of 0.52 inch (1/2") and outer diameter of 0.69 inch, designed to meet demanding automotive and motorsport plumbing needs. Built to operate across a wide thermal range and tested to strong working and burst pressures, it’s intended for use where chemical resistance and dimensional stability are required.

How hot and how much pressure can this AN10 PTFE hose handle?

The PTFE core withstands extreme temperatures from -76°F to 446°F (-60°C to 230°C), making it reliable in hot engine bays and cold climates. Its rated maximum working pressure is 1,250 PSI with a bursting pressure of 3,750 PSI, giving significant safety margins for fuel systems and high-pressure feed lines.

• Working temperature: -76°F to 446°F (-60°C to 230°C)
• Maximum working pressure: 1,250 PSI
• Bursting pressure: 3,750 PSI
• Tested for use with fuels and common automotive fluids

Will this hose work with E85, gasoline, and other automotive fluids?

Yes — the PTFE inner liner is chemically inert and compatible with a broad range of automotive media including gasoline, E85 blends, lubricants, and coolant in many applications. The nylon braid protects the PTFE from abrasion and handling while retaining chemical resistance of the liner itself.

• Suitable for gasoline and high-ethanol fuels like E85
• Compatible with engine oils, transmission fluids, and most coolants
• PTFE liner prevents swelling and degradation from fuels
• Recommended for fuel delivery, return lines, and certain coolant or lubricant runs

How should I plan for installation and routing with this PTFE hose?

This PTFE hose is relatively stiff compared with rubber lines; it won’t fold or kink and must be routed with sweeping bends or fittings. Professional installation is recommended to ensure proper clamping, correct AN fittings, and secure routing away from sharp edges and rotating components.

• Inner diameter: 0.52 inch (1/2"), outer diameter: 0.69 inch
• Length: 20 ft (6 m) — measure vehicle runs before cutting
• Avoid tight 90° bends; use AN fittings or tube bends for direction changes
• Use corrosion-resistant clamps and proper mounting points

What quality and durability features does the EVIL ENERGY line offer?

Construction pairs a smooth, chemically resistant PTFE core with a rugged nylon braid for abrasion resistance and improved handling. The combination provides long-term dimensional stability under heat and pressure, while the specifications indicate suitability for demanding automotive and motorsport environments.

• PTFE core resists chemical attack and fuel permeation
• Nylon braid adds abrasion protection and visual finish
• High pressure and burst ratings for performance applications
• Black finish for discreet installation and clean engine bay appearance

Who is this for: The EVIL ENERGY AN10 PTFE fuel line kit is aimed at automotive enthusiasts, race teams, and professional mechanics who need a long length of E85-capable AN10 hose for custom fuel systems, return lines, or high-temperature plumbing. If you plan custom routing, require high chemical resistance, and value high working pressures, this kit supplies a durable PTFE-lined solution — but plan the installation or seek a professional fitter because PTFE hose needs correct fittings and routing to perform safely.