EVIL ENERGY Inline Fuel Filter 100 Micron — 50mm Red Housing with 6AN/8AN/10AN Adapters, Reusable Stainless Mesh

This compact inline filter is designed to trap particles 100 microns and larger, helping protect injectors, pumps and carburetors on gasoline and diesel systems (not compatible with E85). The filter body uses lightweight aluminum alloy for durability and heat tolerance while the internal mesh element is stainless steel for corrosion resistance. A removable design and included adapters make it straightforward to fit varied hose sizes and to clean or replace the element for ongoing maintenance.

How do I install the EVIL ENERGY filter correctly?

Installation is straightforward but direction-sensitive: the arrow on the housing shows flow direction. Ensure the closed end of the filter element aligns with the spring; fuel should flow from the spring end toward the open end to maintain proper filtering and longevity.

• Match hose to included 6AN, 8AN or 10AN adapter and hand-tighten fittings.
• Confirm arrow points in the direction of fuel flow from tank to engine.
• Seat the filter element so the closed end docks with the spring before final assembly.
• Check O-ring seals for proper compression to avoid leaks.

What vehicle systems and fuels can this filter be used on?

The EVIL ENERGY inline filter works with most gasoline and diesel fuel systems in cars, trucks, motorcycles, and marine engines where 100‑micron filtration is acceptable. It is not suitable for ethanol blends like E85, and you should verify materials compatibility for specialty fuels or additives.

• Compatible with carbureted and fuel‑injected gasoline engines (non‑E85).
• Suitable for diesel systems requiring coarse filtration.
• Can be used in many aftermarket custom plumbing setups.
• Not recommended for ethanol‑rich fuels or systems needing finer filtration.

How do I maintain and clean the filter element?

The stainless steel element is removable for inspection, cleaning, or replacement. Regular maintenance depends on operating conditions, but a simple rinse and visual check will restore flow and extend service life in many cases.

• Drain or depressurize the fuel system before opening the filter housing.
• Remove the housing, withdraw the filter element and rinse with an appropriate solvent or clean fuel.
• Inspect the mesh for damage; replace if torn or severely clogged.
• Reassemble with the O‑ring in place and ensure the spring end orientation is correct.

Who is this for: The EVIL ENERGY Inline Fuel Filter is intended for vehicle owners, hobbyists and mechanics who need a robust, serviceable 100‑micron inline filter that adapts to multiple AN hose sizes. It’s a practical choice for custom builds, replacement on older equipment, or fleets that prefer a reusable stainless element and a compact, anodized aluminum housing in an eye‑catching red finish.