EVIL ENERGY PTFE Fuel Hose AN10 10FT Black — E85/Methanol Compatible, Nylon-Braided

EVIL ENERGY 10AN PTFE fuel hose is a 10-foot, AN10-sized, nylon-braided PTFE line engineered for high-temperature, high-pressure fuel delivery including E85 and methanol-compatible systems.

This braided PTFE hose combines a chemically inert inner PTFE liner with a rugged nylon braid to provide durable fuel routing for race, swap, or replacement applications. With a 0.52-inch inner diameter and 0.69-inch outer diameter, the hose is designed for AN10 fittings and arrives with installation instructions; measuring your run before ordering is recommended. The assembly is rated for wide temperature extremes and high working pressure, making it suitable for many modern fuel and fluid setups where contamination resistance and fuel compatibility matter.

How does this hose handle temperature and pressure demands?

The EVIL ENERGY 10AN PTFE hose is built to operate across an extensive temperature window and sustain substantial pressure. It withstands freezing to high-heat environments and supports typical injection and boost pressures encountered in performance applications.

• Working temperature range: -76°F to 446°F (-60°C to 230°C)
• Max working pressure: 1250 psi
• Bursting pressure: 3750 psi
• Minimum bend radius: 114.3 mm (4.5 inches)

Will this fuel line work with E85, methanol, or diesel?

Yes — the PTFE inner liner offers broad chemical compatibility, making the hose suitable for fuels and many fluids that normally attack rubber hoses. It is appropriate for ethanol blends, methanol, diesel, and a variety of oils and fluids used in engines and drivetrains.

• Compatible fluids: E85, methanol, gasoline, diesel, biodiesel, engine oil, transmission fluid, water
• PTFE liner resists fuel degradation and chemical breakdown
• Nylon braid adds abrasion and kink resistance for routed runs

How do I install and route this AN10 PTFE hose correctly?

Installation is straightforward for those familiar with AN fittings and fuel system plumbing, but professional installation is recommended if you’re unfamiliar with high-pressure fuel systems. The hose ships with installation instructions; measure your routing carefully to avoid tight bends that exceed the minimum bend radius.

• Length: 10 feet — cut to size for custom runs
• Requires compatible AN10 PTFE fittings (EVIL ENERGY fittings recommended)
• Do not fold or kink; maintain bend radius ≥ 4.5 inches
• Hose is relatively stiff — plan clamps and supports accordingly

What applications is this hose commonly used for?

This 10AN PTFE line is versatile in automotive and marine environments where chemical resistance and pressure capability are needed. It’s commonly used for fuel delivery, returns, vacuum, and other fluid transfer roles in performance and retrofit projects.

• Fuel injection lines and carburetor feed lines
• Fuel return and vapor return lines
• Boost/vacuum lines, LS engine swap fuel plumbing
• Fluid transfer for oil, transmission fluid, and compatible liquids

Who is this for: The EVIL ENERGY 10AN PTFE fuel hose is aimed at DIY mechanics, performance builders, and professional installers who need a chemically resistant, high-pressure fuel line for E85, methanol, diesel, or oil systems. If you require a durable AN10 hose that resists fuel degradation and tolerates wide temperature swings, this 10-foot braided PTFE option is suited for custom routing, swaps, and track-focused builds. Note: because the hose is relatively stiff, plan fittings and installation accordingly and consider using EVIL ENERGY PTFE fittings for optimal performance.