EVIL ENERGY Silicone Vacuum Tubing Kit 6-Pack 5ft Black — 3–10mm, heat-resistant, 130 PSI

EVIL ENERGY's silicone vacuum tubing kit supplies six different inner-diameter hoses, each 5ft long, made from food-grade silicone rated for high temperature and up to 130 PSI burst pressure.

This kit gives you a selection of flexible, durable silicone vacuum lines in common sizes so you can match the right tube to vacuum and water-transfer tasks around cars, shops, labs, or home projects. The hoses are manufactured from FDA-compliant pure silicone with reinforced wall thickness to resist collapse under vacuum while maintaining flexibility across a wide temperature range.

What sizes and lengths are included in this set?

The kit contains six individual hoses, each 5 feet (1.5 meters) long, in these inner diameters: 1/8" (3mm), 5/32" (4mm), 3/16" (5mm), 1/4" (6mm), 5/16" (8mm), and 3/8" (10mm). This assortment covers the most commonly used vacuum and low-pressure fluid lines for automotive and small equipment work.

• Six hoses, each 5ft (1.5m) for consistent reach and replacement parts.
• Sizes from 3mm to 10mm inner diameter to fit a wide range of fittings.
• Color: black for neutral aesthetic and UV resistance in many environments.

How durable and heat-resistant are these silicone hoses?

These hoses are made from pure, FDA-compliant silicone and have a 3mm wall thickness to resist kinking or collapse under vacuum. They work across a broad temperature span and have rated working and burst pressures that suit many non-fuel automotive and appliance applications.

• Operating temperature range: -40°F to 428°F (-40°C to 220°C).
• Working pressure: 43 PSI; burst pressure: up to 130 PSI at room temperature.
• 3mm wall thickness reduces vacuum collapse while preserving flexibility.

Which applications are these tubing lines intended for?

The hoses are designed for moving air and water only — ideal for vacuum lines, turbo or boost hoses (non-oil systems), and AC vacuum or drain lines. They are not suitable for transporting natural gas, diesel, or engine oil; avoid use with combustible fuels or pressurized hydrau‑lic systems.

• Common uses: automotive vacuum lines, AC service lines, lab air tubing, water transfer.
• Not for: natural gas, fuel, oil, or other flammable liquids.
• Good for hobbyists, mechanics, and light industrial tasks requiring clean, heat-stable tubing.

How do I install and maintain these silicone vacuum hoses?

Installation is straightforward: cut to the needed length with a sharp blade, push onto matching barbed fittings or use clamps for higher-pressure connections. Silicone resists most chemicals and UV, but routine inspection for abrasion or cuts will extend service life.

• Trim cleanly and use clamps for secure fittings at higher pressures.
• Inspect periodically for nicks or degradation when exposed to harsh environments.
• Clean with mild detergent and water; avoid harsh solvents that could affect connections.

Who is this for: The EVIL ENERGY silicone vacuum tubing kit is aimed at DIY mechanics, automotive technicians, lab technicians, and hobbyists who need a compact assortment of heat-resistant, non-fuel-rated vacuum lines. It’s also useful for anyone replacing worn vacuum or water lines on appliances, performing AC service, or building custom vacuum manifolds where food‑grade silicone and high-temperature tolerance are important.