EVIL ENERGY Transmission Oil Cooler Hose 5/8" x 5 ft SAE J1532 — 150 PSI, NBR/CPE Durable

EVIL ENERGY 5/8" Transmission Oil Cooler Hose is a 5-foot, SAE J1532-compliant line built with an NBR inner tube, polyester reinforcement and CPE outer cover for reliable 150 PSI working performance in transmission and fluid systems.

This transmission cooler hose combines measured dimensions and robust materials to serve transmission, engine and hydraulic fluid routing where SAE J1532 standards are required. With a 5/8" (16 mm) internal diameter, 0.94" outer diameter and a five-foot length, the hose balances flow capacity and installation flexibility while handling extreme temperatures and pressures common in automotive and light industrial systems.

How does this hose stand up to pressure and temperature demands?

The EVIL ENERGY hose is rated for a 150 PSI working pressure and a 600 PSI burst pressure, providing a strong safety margin for typical transmission and fluid-cooling circuits. Its designed temperature range of -40°F to 257°F supports cold starts and high-heat operating environments without losing integrity.

• Working pressure: 150 PSI for sustained system operation.
• Burst pressure: 600 PSI for emergency safety margin.
• Temperature range: -40°F to 257°F for wide environmental compatibility.

What materials are used and why do they matter?

This hose uses a nitrile butadiene rubber (NBR) inner tube that resists oils and fuels, a polyester fiber reinforcement layer for strength and flexibility, and a chlorinated polyethylene (CPE) outer cover for abrasion and weather resistance. The layered construction optimizes durability while preserving bending ease for routing through engine bays.

• Inner tube: NBR resists transmission and engine fluids.
• Reinforcement: polyester fiber for pressure endurance and flexibility.
• Outer cover: CPE protects against abrasion and environmental exposure.

Will this hose fit my system and what are the dimensions to check?

The hose has a nominal inner diameter of 5/8 inch (16 mm) with a ±0.6 mm tolerance and an outer diameter of 0.94 inch (24 mm) ±0.7 mm — useful for matching clamps, fittings and protective sleeves. It comes in a single 5-foot length with a minimum bend radius of 7.56 inches (192 mm), so plan routing to avoid tighter loops that might kink or stress the line.

• Inner diameter: 5/8" (16 mm), tolerance ±0.6 mm.
• Outer diameter: 0.94" (24 mm), tolerance ±0.7 mm.
• Length: 5 ft; minimum bend radius: 7.56" (192 mm).

Which fluids and applications is this hose compatible with?

Designed to meet or exceed SAE J1532 standards, this hose is compatible with a wide range of automotive and machinery fluids including transmission fluid, engine oil, hydraulic oils, power steering fluid and certain lubricants. It can also handle water and gas in appropriate noncritical uses, making it versatile for transmission lines, cooler return lines and similar systems.

• Compatible fluids: transmission fluid, engine oil, hydraulic oil, power steering fluid.
• Also suitable for: lubricant, water and gas in nonhigh-pressure roles.
• Standard: meets/exceeds SAE J1532 for transmission applications.

Who is this for? EVIL ENERGY's 5/8" Transmission Oil Cooler Hose is aimed at mechanics, fleet technicians, restoration builders and DIY vehicle owners needing a dependable, standardized transmission line for cooling and return circuits. Choose this hose when you require SAE J1532-level performance, a five-foot working length for custom routing, and material construction that resists oils, heat, and abrasion in automotive and light-industrial environments.