EZAFIX MAP Sensor Replacement for 2001–2007 Honda/Acura 1.7 bar — OE-Fit, Direct Swap

EZAFIX MAP Sensor Replacement restores accurate manifold pressure readings for compatible 2001–2007 Honda, Acura and Saturn models, delivering OE-level fit and function as a direct swap.

This EZAFIX manifold absolute pressure (MAP) sensor is designed as a direct replacement for a range of early 2000s Honda, Acura and select Saturn vehicles. Built to match the electrical and mechanical specifications of the original sensor, it fits models that use the K20/K24 engines and other factory configurations that require a 1.7 bar unit. The sensor is supplied with common OEM part numbers for cross-reference to make selection easier and minimize diagnosis time.

Which vehicles will this MAP sensor work with?

This MAP sensor covers many popular Honda and Acura applications from the early 2000s and select Saturn models. It’s intended as a one-to-one replacement for factory units on engines that originally used a 1.7 bar sensor. Always verify the part number and connector type on your vehicle before purchase.

• Honda Civic 2001–2005 (1.3L / 1.7L / 2.0L)
• Honda CR-V 2002–2004 (2.4L L4)
• Honda Accord 2003–2004 (2.4L L4) and Element 2003–2006
• Honda Odyssey 2001–2004 (3.5L V6) and Pilot 2003–2004 (3.5L V6)
• Acura MDX 2001–2006, RSX 2002–2004, TSX 2004–2005, TL 2004
• Saturn Vue 2004–2007 (3.5L V6)

What part numbers and specifications should I check before ordering?

Compare the OEM and cross-reference numbers to your existing sensor to ensure compatibility. This EZAFIX unit is offered to replace several common part numbers and is specified as a stock 1.7 bar MAP sensor suitable for the listed engines.

• Cross-reference numbers: 37830-PGK-A01, 12581972, 079800-5410
• Manufacturer codes: MP118, AS191
• Pressure rating: 1.7 bar (stock specification)
• Designed for K20 / K24 engine installations and other OEM matches

How does installation and performance compare to the original sensor?

EZAFIX MAP sensors are built to OE-level form, fit and function to make replacement straightforward and reliable. Installation typically involves unplugging the factory connector, removing the mounting fastener, and swapping in the new sensor—no reprogramming required in most cases.

• Direct-mount replacement that matches factory connector and mounting
• No additional calibration needed for most vehicles after swap
• Same electrical output range and response characteristics as original
• Intended to restore proper manifold pressure readings and engine management inputs

Are there signs that indicate the MAP sensor needs replacement?

Sensors that fail or drift can produce inconsistent pressure readings, which may lead a technician to diagnose fueling and idle irregularities. If your vehicle shows check-engine codes related to MAP or reference pressure, or experiences rough idle, verify the sensor and vacuum lines before replacing.

• Diagnostic trouble codes referencing MAP or manifold pressure
• Intermittent stalling, rough idle, or poor throttle response
• Visual damage to the sensor, wiring, or connector pins
• Vacuum leaks suspected—inspect hoses and intake connections

Who is this product for: The EZAFIX MAP Sensor Replacement is aimed at owners, DIY mechanics and independent shops working on early 2000s Honda, Acura and select Saturn vehicles who need a reliable, direct-fit replacement. If you require an OE-spec 1.7 bar MAP sensor for K20/K24 applications or the listed V6 and L4 engines, this unit provides a cost-effective way to restore correct manifold pressure sensing without vehicle reprogramming in most installations.