FENNICA ENET OBD2 Cable for BMW F/G/i Series — 6.5ft Red Ethernet-to-OBDII with USB-C Adapter, Shielded CAT5e

FENNICA’s ENET OBD2 cable is a 2.0 m Ethernet-to-OBDII data link with a USB‑C adapter designed to connect BMW F, G and select i‑series vehicles to coding and diagnostic software.

This red ENET interface cable provides a straightforward wired connection between a laptop and many BMW models for module access, personalization, and diagnostics. It carries only data, so you will need compatible BMW coding or diagnostic applications — such as E‑SYS, ISTA, ICOM or other third‑party tools — to read, change, or program vehicle modules. The kit includes the 6.5 ft ENET cable and a USB‑C to Ethernet adapter for modern laptops that lack RJ45 ports.

Which BMW models work with this ENET to OBDII cable?

The cable is primarily built for F‑series vehicles (post‑2010 platforms) and many later G‑series and i‑series models, including common 1, 3, 5, 7, GT and X‑series platforms. Compatibility depends on the vehicle’s factory wiring and software support, so not every BMW is guaranteed to respond.

• Typical supported families: F06, F10, F12, F20, F22, F25, F30, F32, F40, F45, F48, F15, F16, F26, F39 and many G‑series variants.
• Works with ESYS 3.22.5, V49.4 data sets and similar versions where ENET is accepted.
• Not universal — confirm your model year and platform before purchase.

How do I set up the ENET cable with my laptop?

Setup is plug‑and‑play for the physical connection: plug the RJ45 end into the OBD port adapter and the USB‑C adapter into your computer. After connecting, install the BMW-compatible software and any needed drivers, configure your network interface to the software’s recommended settings, and then launch your diagnostic or coding tool.

• Connect RJ45 to vehicle and USB‑C to laptop (adapter included).
• Install drivers if your OS does not auto-recognize the adapter.
• Open your chosen BMW software and select ENET connection protocol.

What software works with this ENET Ethernet cable?

The FENNICA ENET cable supports a broad range of BMW development and service tools. It’s compatible with mainstream programs used for coding, diagnostics and flashing, but the cable itself only transmits the data; the software performs the actual commands and module changes.

• Commonly used with E‑SYS for coding and many ISTA/ICOM workflows.
• Also compatible with INPA, NCSExpert variants and some community tools.
• Software versions and vehicle firmware determine feature availability.

Product highlights: 2.0 m (6.5 ft) length for easy reach, shielded CAT5e construction with gold‑plated contacts, 16‑pin OBDII interface, durable copper conductors and a USB‑C adapter for modern laptops. The cable is a reliable data link for hobbyists and professionals but does not include licensing or proprietary BMW software.

Who is this for? If you are a BMW owner, enthusiast, independent mechanic or tuner who wants a reliable wired connection to access coding features and diagnostics on supported F/G/i series cars, this ENET cable kit provides a cost‑effective, well‑built interface. If you expect turnkey software or universal model support, verify your vehicle’s ENET compatibility and prepare the required coding/diagnostic applications before use.