FLITZ Buff Ball 3in Drill Polisher with 1.76oz Metal Polish Paste — Washable, Self‑Cooling Buffing Attachment for Metal & Plastic

Flitz Buff Ball with 1.76oz Metal Polish Paste is a washable, self-cooling 3-inch drill polisher attachment that quickly buffs, shines and protects metal, plastic and painted surfaces.

Designed and assembled in the USA with performance-grade German ingredients, this kit converts any 3/8-inch drill or air tool into a high-speed buffer rated up to 2,000 RPM. The viscose polishing ball resists heat, tearing and lint, and pairs with Flitz metal polish paste to remove oxidation, scuffs and light blemishes while leaving a protective finish. The wheel is washable and reusable for multiple jobs, making it a practical addition to automotive, marine, restoration and DIY toolkits.

How quickly will the Flitz Buff Ball restore dull metal or painted finishes?

The combination of Flitz paste and the 3-inch buffing wheel delivers visible improvement in a single pass on many light corrosion, tarnish or scuff issues. Success depends on the severity of the damage and the pressure/speed used; moderate oxidation or light scratches typically respond in minutes.

• Rated for drills up to 2,000 RPM for fast material removal and shine
• 1.76oz paste sized for several small-to-medium projects
• Viscose fabric resists heat to avoid scorching delicate finishes
• Washable wheel can be reused up to ten cycles to extend value

Will this attachment fit my drill and how do I attach it?

The buff ball is designed for any 3/8-inch drill or compatible air tool and installs quickly onto the chuck like any standard drill accessory. Always secure the wheel and follow your drill’s speed recommendations, starting slow to establish contact and increasing to appropriate RPM once control and contact are stable.

• Compatible with standard 3/8-inch drill chucks and most air tools
• Attach by inserting the wheel shank into the chuck and tightening firmly
• Begin at low speed to avoid splatter or loss of control
• Use moderate pressure; allow wheel rotation to do the work

What materials and surfaces can I use the Flitz kit on?

This buffing system is formulated to work on a wide range of surfaces including stainless and plated metal, aluminum, chrome, painted finishes, fiberglass and many plastics. Avoid use on soft, untreated surfaces where abrasion could remove protective coatings; test in an inconspicuous area when unsure.

• Safe for automotive paint, chrome trim, aluminum and stainless steel
• Effective on plastic and fiberglass with gentle technique
• Not recommended for porous or untreated soft woods and certain clearcoats without a test
• Polish paste offers protection against light oxidation and tarnish after buffing

How do I care for and store the polishing wheel and paste?

The viscose buff ball is washable to remove accumulated paste and debris—machine-wash or clean by hand and air-dry completely before reuse. Keep the polish paste sealed and stored at room temperature to preserve consistency and performance.

• Wash wheel after heavy use; reuse up to about ten times for best results
• Allow wheel to cool before laundering and dry thoroughly to prevent mildew
• Seal polish paste when not in use to avoid drying out
• Store both components in a cool, dry place away from direct sunlight

Who is this for? The Flitz Buff Ball kit is aimed at hobbyists, detailers, restoration enthusiasts and tradespeople who want a portable, economical way to achieve bright, protected surfaces without a dedicated bench polisher. It’s well suited to car and motorcycle owners, boaters, antique restorers and anyone who needs a reusable, heat-resistant polishing accessory that pairs with a small amount of high-quality metal polish.