FLYCLE 2in Wheel Spacers 4x137 for CAN-AM Defender Outlander Commander Kawasaki Mule — 110mm Bore, 10x1.25 Studs, Anodized 4pc

FLYCLE 2-inch (50.8 mm) wheel spacers for 4x137 bolt patterns create extra clearance and a wider track for CAN-AM Defender, Outlander, Commander and compatible Kawasaki Mule models.

These machined aluminum spacers are engineered to move the wheel out 2 inches while preserving hub alignment with a 110 mm center bore and 10x1.25 studs. Sold as a set of four with high-strength studs, threadlockers and instructions, they are forged from 6061-T6 and finished with anodic oxidation for corrosion resistance and durability under off-road conditions.

Will these spacers fit my vehicle?

The FLYCLE spacers use a 4x137 mm bolt pattern and a 110 mm hub bore, matching many CAN-AM Defender, Outlander and Commander models as well as certain Kawasaki Mule variants. They are not compatible with Can-Am Maverick X3 models—match your vehicle's bolt pattern, bore and stud thread before ordering.

• Bolt pattern: 4x137 mm
• Center bore: 110 mm
• Stud thread pitch: 10x1.25
• Thickness: 50.8 mm (2 inches)

How are these spacers made and how long will they last?

FLYCLE spacers are forged from 6061-T6 aluminum and precision CNC-machined to maintain concentricity and fitment. They receive anodic oxidation and heat treatment to increase surface hardness and corrosion resistance while studs are high-strength 12.9 class to withstand wheel loads.

• Material: 6061-T6 forged aluminum
• Finish: anodized for corrosion resistance
• Studs: 12.9 class high-strength hardware
• Manufacturing: CNC automatic processing for precision

What performance or clearance benefits will I see after installation?

Installing these spacers increases track width and creates extra clearance for larger or wider tires, helps resolve brake caliper interference, and gives your vehicle a wider, more aggressive stance. They do not modify suspension geometry but provide space that allows safer fitment of aftermarket wheels and tires.

• Increases tire clearance for larger/wider tires
• Helps eliminate brake-caliper contact issues
• Wider stance improves visual presence and stability feel
• Enables use of wheels with different offset

What comes in the box and how should I torque these spacers?

The kit contains four 2-inch spacers, two high-strength threadlockers and two user manuals to guide installation. The recommended torque guidance for the studs is approximately 8 turns equaling 85–90 lb·ft; always follow the vehicle manufacturer’s wheel torque procedures and inspect hardware after initial use.

• Included: 4 spacers, 2 threadlockers, 2 user manuals
• Recommended torque: ~85–90 lb·ft (approx. 8 turns) for studs
• Installation tip: re-check torque after first 50–100 miles
• Note: not for Maverick X3 models

Who is this for? These FLYCLE 2-inch wheel spacers are intended for UTV and side-by-side owners who need extra clearance for larger tires, have brake caliper interference, or want a wider track for improved stance and handling characteristics. They suit mechanically confident owners or professional installers who can verify bolt pattern, bore size and use proper torque procedures. If you drive a Can-Am Maverick X3, these spacers are not compatible—confirm fitment before purchase. When installed and torqued correctly, they provide a dependable, corrosion-resistant solution for widening wheel fitment on compatible Can-Am and Kawasaki machines.