FLYCLE 3" Front & 2" Rear Leveling Kit for Silverado/Sierra 1500 — 6061‑T6 CNC-Forged Spacers

The FLYCLE 3" front and 2" rear leveling kit lifts 2007–2024 Silverado 1500 and Sierra 1500 trucks to improve stance and clearance using CNC-forged 6061-T6 aluminum strut spacers and studs.

Update the look and function of your 2WD or 4WD Silverado or Sierra 1500 with a precision-engineered lift kit designed to raise the front by 3 inches and the rear by 2 inches. Built from forged 6061-T6 aluminum and finished with anodized corrosion protection, this kit keeps suspension geometry and drivability in mind while avoiding the need for strut or coil disassembly. Installation is straightforward and reversible, making it a practical upgrade for owners who want extra clearance and a more aggressive profile without a full suspension overhaul.

How much ride height will my truck gain and why isn’t it exactly the spacer thickness?

The kit is designed to increase the front ride height by approximately 3 inches and the rear by roughly 2 inches, but the final lift can vary because suspension geometry and preload affect actual clearance. Spacers provide the majority of the height change, while spring compression, wheel/tire size, and factory tolerances influence the final measurement.

• Front gain: ~3 inches nominal using 3" strut spacers.
• Rear gain: ~2 inches nominal using rear spacers/shims.
• Final height depends on tires, wheel offset, and factory suspension sag.
• No permanent cutting or modification to factory struts required.

What materials and build processes ensure durability?

FLYCLE manufactures the spacers from 6061-T6 aluminum that’s forged and CNC-machined for tight tolerances. The surface receives anodic oxidation and heat treatment to improve hardness and resistance to corrosion, while high-strength 12.9-class studs secure the assembly.

• 6061-T6 forged aluminum body for strength and light weight.
• CNC precision machining for accurate fitment and alignment.
• Anodized finish for corrosion protection and lasting appearance.
• Supplied 12.9-grade studs for secure, torqueable connections.

How difficult is installation and what tools or time are required?

Installation is designed to be completed in about 1–2 hours and does not require cutting, drilling, or disassembling struts and coils like some other kits. Basic hand tools and a torque wrench are typically all that’s needed; a lift or jack and stands are recommended for safety and access.

• Typical install time: 1–2 hours for both front and rear kits.
• No strut or coil disassembly required—reduces labor complexity.
• Recommended tools: jack, stands, standard sockets, torque wrench.
• Compatible with stock suspension components on supported models.

Will this kit affect handling or require additional parts?

The FLYCLE leveling kit is intended to maintain factory-like handling while giving additional clearance and a more aggressive stance. Depending on tire diameter changes, wheel offset, or heavy-duty use, alignment and possible bump stop or sway bar considerations may be recommended.

• Retains original suspension geometry as much as possible.
• Wheel alignment recommended after installation.
• Larger tires may need wheel spacers or different offsets for clearance.
• For extreme off-road loads, inspect bump stops and steering components.

Who this is for: The FLYCLE 3" front / 2" rear leveling kit suits Silverado 1500 and Sierra 1500 owners (model years 2007–2024) who want a clean, factory-friendly lift for improved tire clearance and a more assertive look without replacing struts or performing heavy modifications. It’s aimed at DIY-savvy truck owners and professional installers who prefer a high-strength aluminum solution with corrosion resistance and precision fitment.