GTMOTO D3S HID Bulbs for 2013-2014 Ford F-150 — Pair 6000K 35W Daylight Xenon, Direct-Fit

If your 2013 or 2014 Ford F-150 came with projector-style HID headlamps, these GTMOTO D3S D3S-C1 bulbs replace the original xenon capsule to deliver whiter, clearer illumination and faster run-up to full intensity. They are intended only for factory projector HID housings, not for halogen reflector lamps. These bulbs are packaged as a pair and built using anti-UV quartz glass for extended life compared with older xenon designs.

Will these bulbs fit my 2013–2014 Ford F-150?

They fit F-150 trucks that were factory-equipped with D3S projector xenon headlamps—typically higher trim models (Platinum, Lariat, King Ranch, etc.). They will not install in models that use H13/9008 halogen reflector lamps (common on lower trims).

• Compatible with factory projector HID low-beam housings (D3S socket).
• Not compatible with halogen reflector headlamps or H13/9008 sockets.
• Check your headlamp housing or owner’s manual for bulb type before purchase.

How much brighter and whiter are these GTMOTO D3S bulbs?

These are 35W high-intensity discharge xenon capsules tuned to approximately 6000K, producing a crisp daylight white appearance that improves visual contrast compared with dimmer 4300K stock units. Brightness is increased over older D3S bulbs, giving a cleaner beam pattern in projector housings.

• Color temperature: ~6000K (daylight white).
• Power: 35 watts, instantaneous high intensity with quick warm-up.
• Designed to improve clarity and perceived brightness in projector optics.

Is installation difficult and will I need extra parts?

Installation is a straightforward, tool-light swap when used on compatible D3S projector lamps—most owners can complete the change in about 10 minutes without modifications. These are AC 42V xenon gas capsule bulbs that plug into the original ballast and socket, so no extra conversion kit is necessary when your vehicle already uses D3S HID systems.

• Simple plug-and-play replacement for D3S-C1 OEM setups.
• No DC 12V halogen or LED adapters required for factory HID systems.
• Do not attempt to fit into halogen housings or use without a proper HID ballast.

How long will the bulbs last and what materials are used?

The GTMOTO D3S bulbs use anti-UV quartz glass and are rated for extended runtime, typically several thousand hours under normal use. They provide a fast on-time and stable light output without the warm-up delays associated with some older xenon designs.

• Anti-UV quartz glass construction for durability and clarity.
• Rated life commonly over 3,000 hours under normal conditions.
• Packaged as a two-piece set to refresh both headlamps at once.

Who this is for: GTMOTO D3S bulbs are designed for F-150 owners who have factory projector xenon headlamps and want a brighter, whiter beam without changing housings or adding conversion electronics. If your truck is a high-trim 2013–2014 model with genuine D3S HID equipment, this set is a direct, quick upgrade. Do not buy these bulbs for reflector-style halogen headlamps or vehicles that require H13/9008 bulbs.