Gyeon TotalRemover Ceramic Coating Strip Agent 500ml — Fast-Acting, Rinse-Off Paint Prep

Gyeon Q²M TotalRemover is a non-abrasive strip agent that removes waxes, sealants and old coatings to leave automotive paint ready for ceramic or polymer bonding.

When prepping a vehicle for a new ceramic coating, the surface must be free of residues that prevent proper adhesion. Gyeon TotalRemover is formulated for painted surfaces to dissolve sealants, factory waxes and previous coatings, offering an efficient rinse‑off workflow that reduces the need for aggressive polishing. It helps detailers and enthusiasts achieve a clean, bond-ready finish without harming the clear coat.

How quickly does TotalRemover work on existing sealants and wax?

TotalRemover acts rapidly to lift and break down surface-applied products so they can be rinsed away with minimal mechanical action. It’s designed for short dwell times on clean, wet paint, cutting prep time compared with repeated compound or polish passes. The product minimizes labor while still delivering a residue-free surface for coating application.

• Fast-acting chemistry that dissolves sealants and waxes
• Short dwell time on wet, clean paint
• Rinse-off removal reduces scrubbing and abrasives
• Saves time compared with multiple polishing passes

Can I use this on factory-fresh cars before coating?

Yes — TotalRemover is ideal for factory-new paint where pretreatment is necessary but you want to avoid aggressive abrasion. It removes manufacturing sealants, transport coatings and any light contaminants without altering the OEM clear coat. This creates a neutral, bondable surface that improves the durability and gloss of the subsequent ceramic layer.

• Specifically formulated for painted surfaces only
• Removes factory and transport residues safely
• Leaves paint chemically clean for better coating adhesion
• Reduces need for heavy polishing on new cars

Does TotalRemover eliminate the need for polishing entirely?

While TotalRemover eliminates many coating and wax residues, it is not a substitute for corrective polishing when paint has scratches or heavy oxidation. Its purpose is to remove bonding inhibitors so coatings can adhere properly; if defects are present you should correct them with polishing before applying the coating. For many prep jobs with intact clear coat, it significantly reduces or removes extra polishing steps.

• Not intended as a paint-correcting compound
• Reduces polishing for residue removal tasks
• Use polishing only for swirl marks, scratches or oxidation
• Best combined with mechanical correction when needed

How should professionals integrate this into a detailing workflow?

Detailers typically use TotalRemover after an initial wash and clay or decontamination step. Apply to clean, wet panels, allow a brief dwell time, agitate lightly with a mitt if necessary, then rinse thoroughly. This streamlines prep by addressing coatings and waxes in one step before final surface inspection and coating application.

• Use post-wash and decontamination for best results
• Apply to wet paint; short dwell then rinse off
• Compatible with mitt application for panel-by-panel prep
• Follow with inspection and coating application

Who is this for: Gyeon Q²M TotalRemover is aimed at professional detailers and knowledgeable enthusiasts who prepare paint for ceramic or polymer coatings. It’s especially useful when you need to remove sealants, waxes or old coatings quickly and safely without heavy abrasion. If you want a cleaner, more consistent surface for improved coating performance while preserving factory clear coat, this product fits that workflow.

Ingredients

Liquid