Hapytrip 12V Marine USB Charger Panel with PD 30W + Dual QC3.0 and Waterproof 150W Lighter Socket, Aluminium Switch Module

Hapytrip's 2-in-1 marine switch panel combines a PD3.0 30W USB-C plus two QC3.0 USB-A ports and a 150W waterproof cigarette lighter socket in a single aluminum alloy module with a power switch.

This compact DIY kit is built for boats, RVs, ATVs and cars that need a durable, high-speed charging hub with a dedicated switched outlet. The aluminum charger housing improves heat dissipation and resists scratches, while the included waterproof socket and cover keep devices protected from spray and dust. Everything needed for installation—short wires, terminals and screws—ships in the box for a tidy panel-mount setup.

How fast are the USB ports and what devices will they charge?

The charger provides one PD3.0 USB-C port (30W) and two Qualcomm QC3.0 USB-A ports (up to 18W each), delivering a combined maximum of 66W. That makes it suitable for fast-charging smartphones, tablets, small laptops that accept 30W PD, and accessories like power banks and cameras.

• PD3.0 USB-C: 30W for fast-compatible phones and small laptops
• QC3.0 USB-A: up to 18W per port for rapid phone/tablet top-ups
• Total output: up to 66W shared across ports
• Compatible with PD and QC protocols for broad device support

Is the cigarette lighter socket truly waterproof and how much power can it deliver?

The socket includes a detachable waterproof cover and is rated for 120W at 12V and 150W at 24V, sufficient for common vehicle accessories. It’s designed for devices such as dash cams, small vacuums, radar detectors and air purifiers used onboard or on the road.

• Waterproof/dustproof protective cap for outdoor use
• Power rating: 120W (12V) / 150W (24V)
• Suitable for dash cams, GPS units, portable vacuums and similar loads
• Switchable socket prevents idle power draw

What safety features and materials protect the unit during use?

Hapytrip built the module with an aluminum alloy body for improved heat dissipation and durability versus plastic alternatives. The charger includes overload, overcurrent and short-circuit protections plus an intelligent IC to guard the circuit against wiring mistakes and component failure.

• Aluminum alloy housing: scratch-resistant and better heat control
• Overload, overcurrent and short-circuit protection circuits
• Built-in intelligent IC to prevent circuit burn-out from miswiring
• Switch control reduces unnecessary power consumption

How easy is installation and what comes in the kit?

The kit includes the 3-port charger with switch, a 150W cigarette socket, two short connection wires, two blue terminals, four mounting screws and a 2-in-1 panel plate. It supports horizontal or vertical mounting and ships with an installation diagram to guide a straightforward DIY fit.

• All mounting hardware included for quick panel installation
• Two short wires and terminals for secure connections
• Mountable in either orientation to suit dash or console layouts
• Compact footprint preserves space in tight panels

Who is this for: This Hapytrip module is aimed at boaters, RV owners, overlanders and drivers who want a compact, durable charging center that handles modern fast-charge protocols and a switched, waterproof 12V outlet. If you need a tidy panel-mounted solution that delivers PD and QC fast charging while protecting devices from moisture and wiring errors, this kit is designed for you.