Haturmyko 1.25in 90° Silicone Elbow Coupler, 7" Legs — Reinforced High-Temp Intercooler Hose

Haturmyko's 1.25 inch 90° silicone elbow coupler is a reinforced, high-temperature flexible hose with 7" legs designed for intercooler, intake, turbo and radiator connections.

This silicone elbow blends a compact 90-degree bend with durable multi-layer construction to replace or upgrade factory rubber plumbing. Engineered for environments that require both flexibility and strength, this coupler suits turbo inlets, radiator passages, intercooler piping and a wide range of custom installations where a tight-radius silicone join is needed.

How durable is this Haturmyko 90° silicone elbow under heat and pressure?

The coupler uses a four-layer reinforced silicone build that resists heat, pressure and repeated vibration better than ordinary rubber hoses. Rated for extreme operating temperatures and tested burst capacity, it's made to last through demanding under-hood conditions without softening or splitting prematurely.

• Working temperature range from -60°C to 300°C for extreme applications.
• Low-temperature flexibility maintained down to -40°C.
• Thick 0.2" (5 mm) wall for improved pressure tolerance and longevity.
• Burst pressure specification ≥ 6KV for high-pressure scenarios.

Will this 1.25" elbow fit my vehicle's intercooler or turbo plumbing?

The ID is 1.25 inches (32 mm), a common size for many aftermarket and some OEM systems; the two 7" legs provide enough reach for tight routing or wrap-around connections. Always measure your existing piping and clearances to confirm compatibility before ordering.

• Internal diameter: 1.25 in (32 mm) to match same-size silicone and metal pipes.
• Leg length: 7 in (178 mm) offers flexibility for angled runs and clamp placement.
• Universal fit for intercooler, intake, turbo inlet/outlet and radiator hose use.
• Works well in both OEM repairs and custom fabrications with hose clamps.

How easy is this elbow to install and maintain?

Installation is straightforward: slide the coupler onto the mating pipe ends and secure with clamps. The silicone surface resists oil and coolant penetration, making regular inspection and cleaning simple for routine maintenance.

• Slide-on fitment with standard hose clamps (not included).
• Smooth interior aids airflow and reduces turbulence in intake applications.
• Silicone exterior wipes clean of grime, oil and road debris.
• Suitable for DIY installation or professional shop fitment.

What are the key specifications I should confirm before buying?

Double-check inner diameter, leg lengths and wall thickness against your application; the Haturmyko elbow is built to withstand high temperatures but needs correct sizing for a leak-free joint. Confirm clamp diameter range and clearance around the bend area for secure installation.

• ID: 1.25 in (32 mm).
• Leg length: 7 in (178 mm) on each side of the 90° bend.
• Wall thickness: 0.2 in (5 mm) for strength and pressure resistance.
• Material: pure silicone, 4-layer reinforced construction.

Who is this for? This Haturmyko silicone 90° elbow is aimed at car enthusiasts, tuners and mechanics needing a reliable, heat-resistant join for turbo, intercooler or coolant plumbing. It's also a practical replacement for worn OEM hoses on street cars, race vehicles and custom builds where a compact 90-degree silicone coupler with long legs is required.