JMCHstore Torque Converter Engine Riser Hardware Kit 1in Lift — 3-1/8in Mount, Black Corrosion-Resist

JMCHstore's Torque Converter Engine Motor Riser Hardware Kit raises your small engine by 1" to create reliable clearance for installing a torque converter on mini bikes, go-karts, and off-road machines.

If you're retrofitting a 4–7 HP engine such as a Predator 212/224, Honda GX160/GX200, or a common 196cc clone onto a mini bike or kart, this riser kit provides the precise spacing and stout hardware needed for a clean, durable installation. The kit is built to match engines with a 3-1/8" center-to-center mount pattern and includes corrosion-resistant finish and vibration-resistant washers for long-lasting stability.

How does the riser create the space needed for a torque converter?

The riser lifts the engine approximately 1 inch, increasing clearance between the engine and the frame so the torque converter has room for proper alignment and belt routing. This prevents interference and allows the converter to operate without rubbing or binding.

• 1" elevation added to mounting height for clearance
• Designed for 3-1/8" bolt center spacing common to small engines
• Compatible with multiple engine makes and clone patterns

What hardware is included and why does it matter?

The kit supplies fine-thread 5/16" x 2.5" bolts, nuts, and spring washers engineered to hold under vibration and torque loads. Fine threads offer finer clamping adjustment while the spring washers resist loosening that can occur during engine operation.

• 5/16" x 2.5" fine-thread bolts for secure fastening
• Spring washers to reduce back-off from vibration
• Black anti-corrosive coating to protect metal surfaces

Which engines and vehicles will this riser kit fit?

This riser is made to work with many popular small engines and their clones, as well as the mini bikes and karts that use them. It fits engines rated roughly 4–7 HP that share the 3-1/8" engine mount pattern, covering Predator, Honda, Hisun, Tillotson types and other 196–224cc variants.

• Predator 212cc and 224cc platforms
• Honda GX160 / GX200 and common 196cc clones
• Minibikes, go-karts, and off-road small vehicles requiring converter clearance

Will the riser withstand outdoor use and engine vibration?

The riser features a protective black anti-corrosion paint layer and spring-washer-equipped fasteners to handle exposure and engine movement. Properly torqued hardware and the coating help extend service life in typical recreational environments.

• Black corrosion-resistant finish for weather protection
• Vibration-resistant fasteners to maintain clamping force
• Durable construction suitable for regular use on off-road vehicles

Who is this for: This JMCHstore Torque Converter Engine Motor Riser Hardware Kit is intended for DIY mechanics, hobbyists, and small-vehicle builders who are upgrading or adapting 4–7 HP engines with a 3-1/8" mount spacing. It’s especially useful for anyone adding a torque converter to mini bikes, go-karts, or light off-road machines who needs a reliable, corrosion-resistant lift and vibration-secure hardware to achieve correct alignment and safe operation.