KEMIMOTO Whip Light Rocker Switch Wiring Harness Kit 12V — LED Backlit, 10ft Cable, 10A Fuse

The KEMIMOTO Whip Lights Rocker Switch with Wiring Harness Kit is a complete 12V control and protection solution that lets you power, switch, and protect whip lights on UTVs, ATVs, trucks and boats without wiring directly to the vehicle's main battery.

Installers and riders who add LED whip lights need a compact, reliable way to switch the lights, protect the original battery, and keep wiring tidy. This KEMIMOTO kit includes a rocker switch with an LED backlight, a fuse, heavy-duty wiring, and an extended harness so you can mount the switch in a dash and run the power cleanly to your lights. The assembly is engineered for 12V systems and built from copper conductors with insulating sheaths to resist water and abrasion in off-road conditions.

How does this harness protect my vehicle battery?

The harness isolates whip lights from the factory wiring, preventing continuous draw on the original battery and reducing the risk of slow battery drain. The kit uses a blade fuse and a dedicated wiring path so the lights only draw power when switched on, and the load rating is sized for typical LED whip loads.

• Dedicated power feed keeps factory circuits untouched
• 10A blade fuse protects against short circuits and overloads
• Up to 160W load capacity for multiple LED whip setups
• Over 10 ft of cable for flexible routing away from the battery

Will the switch and harness hold up to weather and vibration?

Yes—the kit is built from quality copper wires wrapped in waterproof insulating sheaths suited for outdoor, off-road environments. The rocker switch features an LED backlight that stays off when the switch is off to avoid parasitic drain, and the wiring and connectors are chosen for reliability under vibration and moisture exposure.

• Copper conductors for consistent conductivity and heat tolerance
• Water-resistant insulation to block moisture ingress
• Rocker switch designed to minimize standby power draw
• Secure connectors to reduce loosening from engine and trail vibration

What vehicles and setups is this wiring harness compatible with?

The harness works across most 12V platforms, making it a universal choice for aftermarket whip lights on UTVs, ATVs, motorcycles, trucks, SUVs and boats. The plug-and-route length accommodates varied mounting locations so you can place the switch on dashboards, center consoles, or roll cages.

• Designed for 12V systems (12V DC operating voltage)
• Compatible with UTVs, ATVs, motorcycles, trucks, SUVs and marine 12V circuits
• 20 AWG wire gauge and 1 lead type for standard whip LED loads
• Switch ratings: 12V 20A and 24V 10A DC for flexible application

How easy is installation and what electrical specs should I know?

Installation is straightforward for anyone comfortable with basic vehicle wiring: route the harness, connect the fused power lead to the battery or accessory relay, and mount the rocker switch in a dash opening. Knowing the specifications helps ensure you don’t exceed the load limits of either the harness or your whip lights.

• Simple wiring: switch, fused feed, and ground connections
• 10A blade fuse included to match typical whip current draw
• Up to 160W load capacity—verify total wattage of your whip lights
• Over 10 ft of cable for flexible routing and neat installations

Who is this for? The KEMIMOTO Whip Lights Rocker Switch with Wiring Harness Kit is for off-road enthusiasts, fleet owners, and DIY installers who want a safe, weather-resistant, and easy-to-install control for LED whip lights. If you need to add lighting without compromising factory wiring or battery life—and want a low-power illuminated switch for dash mounting—this kit covers the electrical protection, length, and compatibility required for most 12V accessory installations.