KJE 6.5L Oil Fluid Extractor Pump — Pneumatic/Manual Oil Extractor with On-Unit Hose Storage

The KJE 6.5L Pneumatic/Manual Oil Fluid Extractor Pump is an all-in-one oil-change kit that pulls engine and mechanical fluids quickly by air or by hand while storing hoses neatly on-board.

This compact 6.5-liter extractor combines a pressurized pneumatic option with a manual hand pump so you can remove oil and other vehicle fluids without crawling underneath equipment. The kit ships with multiple extension tubes, a brake-bleeder hose, a dipstick-style gauge and on-unit storage to keep dirty lines contained—designed to save time, reduce mess and simplify routine maintenance on cars, boats, lawn equipment and light industrial gear.

How does the dual pneumatic and manual operation work?

The unit operates two ways: hook it to an air compressor for a high-speed extraction, or use the integrated manual pump when no compressor is available. Pneumatic mode boosts suction for faster removal, while manual mode gives you control in remote or low-pressure situations.

• Pneumatic suction up to roughly 1.8 L/min for rapid fluid removal.
• Manual pump for spot jobs, remote locations, or when compressors aren’t handy.
• Simple switching between modes without specialty tools.
• Sealed 6.5 L tank minimizes spills and stores extracted fluid safely.

Can it reach deep or awkward reservoir locations?

Yes—this extractor includes a set of long, precision-machined tubes and adapters that let you reach low-sitting or recessed oil sumps and reservoirs. The longest tube extends to access hard-to-reach bottoms, so you can recover more fluid and leave less residue behind.

• Multiple tube diameters and a 78-inch maximum length for deep tanks.
• Brake-bleeder hose and smaller-diameter lines for thin fluids and steering systems.
• Rubber seals and alternate rings ensure a tight fit for different ports.
• Wire dipstick included to verify tank fill level and avoid overfilling.

How does it reduce mess and storage hassle during service?

The pump’s integrated pipe storage units let you stow used hoses on the machine body, preventing drips and oil streaks in the garage. Accessories are arranged for quick assembly and the kit’s components are engineered to nest compactly so cleanup and transport are easier.

• Two on-unit hose storage tubes keep dirty lines contained and upright.
• Compact footprint (approx. 7.87 x 7.87 x 21.65 inches) fits in most trunks and workshops.
• Accessories fasten securely for transport and prevent accidental spills.
• Simple manual for step-by-step setup and safe fluid handling guidance.

What types of fluids and vehicles is the extractor compatible with?

The KJE extractor is intended for many routine automotive and small-engine fluids, from engine oil to transmission, power steering and gear oils. It’s not designed for highly volatile, corrosive or extremely hot liquids—follow safety guidance for each fluid type.

• Works with engine oil, transmission fluid, gear oil, antifreeze, and power steering fluid.
• Suitable for cars, motorcycles, boats, RVs, lawnmowers, golf carts and light industrial equipment.
• Not recommended for strong acids, concentrated alkalis, or boiling fluids.
• Helps perform cleaner DIY maintenance and reduces need for vehicle lifts.

Who is this for? The KJE 6.5L Pneumatic/Manual Oil Fluid Extractor is aimed at hands-on DIYers, small workshop owners and marine or power-sports enthusiasts who want a portable, flexible tool to remove fluids cleanly and quickly. It benefits anyone who prefers avoiding full vehicle underbody access, needs to service multiple fluid types, or requires an extractor that can be used with or without an air compressor. If you need a compact, well-equipped extractor to streamline routine maintenance and keep messy hoses contained, this kit is built to fit those tasks.