KOCHCHEMIE F6.01 Fine Cut Compound 250ml – Fast Scratch & Swirl Removal, High Gloss

KOCHCHEMIE F6.01 FINE CUT is a 250ml high-performance, silicone-free buffing compound engineered to remove wash scratches, sanding marks up to 2,500 grit and restore deep gloss on modern automotive paints.

Designed for professional detailers and serious car enthusiasts, this next-generation machine polish uses premium aluminum oxide abrasives and an optimized grain profile to cut efficiently while leaving minimal haze. The formula balances cutting power (CUT: 6.0) with a strong final shine (GLOSS: 7.0), making it suitable for both correction and finishing steps when paired with the right pads and technique.

How quickly will F6.01 remove swirls and light scratches?

F6.01 is formulated for fast, visible correction of common surface defects such as wash-induced swirls and medium scratches. Its intelligent abrasive blend targets imperfections without excessive dwell time, reducing the number of passes needed.

• Removes wash scratches and swirl marks efficiently
• Eliminates sanding marks up to 2,500 grit
• Works best with a yellow FINE CUT pad or lambswool for optimal cutting
• Use crosswise polishing up to 2,000 rpm for fastest results

What finish and shine can I expect after polishing?

The compound gives a deep, long-lasting sheen thanks to its balanced abrasive-to-binder ratio. After initial correction, residue can be cleared with a clean microfiber to reveal high gloss, and a follow-up with a finer polish such as Koch-Chemie Micro Cut M3.02 enhances mirror-like clarity.

• High final gloss score (GLOSS: 7.0) for modern paint systems
• Low haze removal when finished correctly
• Compatible with subsequent finer polishes for a showroom finish
• Silicone-oil-free formula to reduce contamination risk

How should I use F6.01 safely and effectively?

Start with a pre-cleaned, cool surface and test compatibility on an inconspicuous area. Apply a small amount to the polishing pad, work crosswise at controlled speeds and pressures, then wipe off residue and inspect the result before moving on.

• Shake bottle before use and avoid hot surfaces
• Apply with Koch-Chemie FINE CUT yellow pad or lambswool at up to 2,000 rpm
• Begin with higher pressure at lower speed, then reduce pressure and increase rpm for gloss
• Remove residue with a quality microfiber cloth (e.g., Edgeless series)

Will this work on modern scratch-resistant and OEM finishes?

F6.01 is formulated to suit contemporary paint formulations, including tougher clear coats advertised as scratch-resistant. Always perform a spot test to confirm compatibility and to determine the proper machine settings for best results.

• Suitable for most modern OEM and aftermarket clear coats
• Effective on vehicles, motorcycles and commercial paintwork
• Recommended to test small area for new or sensitive finishes
• Follow with Micro Cut M3.02 for ultra-fine finishing when needed

Who is this for: KOCHCHEMIE F6.01 FINE CUT is intended for professional detailers, body shops and committed car enthusiasts who need a reliable 250ml compound that balances cutting ability with strong finishing gloss. It’s ideal for automotive reconditioning projects, scratch repair, and polish sequences where sanding correction and a deep final sheen are required. Always verify substrate compatibility and follow safety precautions such as avoiding application on hot surfaces and protecting the product from frost or excessive heat.