LOGOL Tyre Valve Stem Quick Replacement Tool Kit — for 11.3 mm Rim Holes, Rapid No-Remove Repair

LOGOL Tire Valve Stem Quick Replacement Tool Kit (51025) is a compact set of tools that lets you swap leaking rubber valve stems through the rim hole quickly—no tire unmounting required for compatible wheels.

This tool kit was engineered to make roadside or shop valve repairs faster and more reliable for wheels with 11.3 mm (0.453 inch) rim holes. Designed for non-TPMS wheels, the set includes multiple purpose-built pieces so each part performs a single, repeatable task. The components are precision-shaped and tested for durability so you can replace a valve stem in seconds when the fit is right.

How does the kit let me change a valve without removing the tire?

The LOGOL kit uses specialized extraction and seating tools that pass through the rim hole to pull the old stem out and seat a new stem from the outside. This approach avoids dismounting the tire when the rim opening is the correct diameter and there is sufficient access inside the wheel.

• Works through 11.3 mm (0.453 in) rim holes commonly found on many rims.
• Includes a pulling tool and seating device shaped to guide the stem into place.
• Saves time and reduces need for additional workshop equipment when applicable.

Which wheels and valves are compatible with this kit?

The kit is intended for rubber valve stem replacement on wheels with rim holes around 11.3 mm (0.453 inch). It is not compatible with wheels that use integrated TPMS sensor stems or designs that block interior access to the valve hole.

• Compatible: standard rubber valve stems for non-TPMS wheels with 11.3 mm rim holes.
• Not compatible: wheels with factory TPMS sensors or nonstandard hole sizes.
• Check your rim hole diameter and sensor setup before attempting a repair.

How fast and reliable is the replacement process?

When used correctly on a compatible wheel, the LOGOL kit lets an experienced user swap a valve stem in about 15 seconds. Each tool in the set is dedicated to a single step—removal, preparation, seating—so the operation becomes repeatable and efficient with practice.

• Typical replace time: roughly 15 seconds for trained users on accessible rims.
• Durable materials and tested shapes help ensure consistent seating every time.
• Practice the steps on a spare wheel to build speed and confidence before roadside use.

What should I consider before using this kit on my vehicle?

Confirm your rim hole size and whether your wheels use TPMS sensors. Also ensure the wheel is safely supported and the tire is deflated to recommended levels before attempting repair. If you’re unsure about sensor presence or wheel construction, consult a tire professional.

• Measure rim hole diameter; must be approximately 11.3 mm (0.453 in) for correct fit.
• Do not use on wheels with TPMS sensors—this kit is not suitable for those systems.
• Follow safe lift and deflation practices; use protective gloves and eye protection.

Who is this for: The LOGOL 51025 quick valve replacement kit is for mechanics, mobile tire technicians, fleet maintenance teams, and DIYers who regularly service non-TPMS wheels and need a fast, repeatable method for replacing rubber valve stems through the rim hole. It’s ideal for professionals who value speed and for enthusiasts who want a reliable, purpose-built toolset for common valve repairs. If your wheels use TPMS sensors or nonstandard valve assemblies, this kit is not recommended.