MB Stone Care Marble Polish & Countertop Polishing Kit MB-22 — 8 oz Powder, Drill Pad & pH-Neutral Cleaner

MB Stone Care MB-22 is a complete polish-and-clean kit that restores a glossy, low-scratch finish to calcite-based stone countertops and floors without professional diamond pads.

Designed for homeowners and pros who want to refresh marble, limestone, travertine and terrazzo, the MB-22 kit combines a calcite-friendly polishing powder with a pH-neutral cleaner and drill-mounted pads so you can remove light scratches and etches yourself. The wet-polish system forms a clingy paste that stays on the work area, letting you polish right up to sinks, backsplashes and edges without splatter or accidental damage to surrounding surfaces.

How does MB-22 restore shine to calcite-based stones?

The MB-22 powder is formulated for calcite-bearing materials and polishes by abrading and refining the surface in multiple light passes, producing a mirror-like gloss. It removes micro-scratches and dulling caused by daily wear when used with the included drill pad and finishing pads.

• Polish powder made for marble, limestone, travertine and terrazzo
• Requires several short passes for progressive shine
• White finishing pad produces the final smooth, reflective surface
• Uses mechanical polishing with a standard power drill—no diamond pads required

What comes in the MB-22 countertop polishing kit?

The kit supplies everything needed to clean and polish a small-to-medium countertop or floor area: an 8 oz container of polish powder, a quart of MB Stone Care Easy Oxy cleaner in a sprayer bottle, and a set of pads with a 5-inch drill pad driver. This combination makes it easy to prep, polish and remove residue without hunting for extra accessories.

• 8 oz polishing powder (calcite-based stone formula)
• 1 qt Easy Oxy pH-neutral stone cleaner with sprayer
• 5-inch drill pad driver, two hog-hair polishing pads, one white finishing pad
• Instructions for use with a standard drill at low speed

Is the MB-22 safe to use around sinks and food prep areas?

Yes—the wet-polish paste adheres to the stone, reducing splash and keeping surrounding areas protected while you work. The included Easy Oxy cleaner is pH-neutral, biodegradable and non-toxic, so it’s suitable for cleaning surfaces before and after polishing near food preparation zones.

• Thick wet-polish paste minimizes splatter and edge etching
• Cleaner is pH-neutral, biodegradable, and lightly citrus-scented
• Safe to use up to faucets and on backsplashes when following directions
• Rinseable residue for food-safe surfaces after final cleaning

How do I use the polish kit with a household drill?

Attach the 5-inch pad driver to a standard drill, sprinkle the powder in a small circle on the stone surface, mist with water from the sprayer, and polish at low speed. Work in roughly one-minute passes per square foot, keeping the paste wet and finishing with the white pad for a swirl-free gloss.

• Use low drill speed to avoid overheating or gouging
• Keep polishing area wet—do not let paste dry on stone
• One-minute per sq ft is a guideline; repeat passes until desired gloss
• Finish with hog-hair pads then the white finishing pad for highest shine

Who this kit is for: MB-22 is aimed at homeowners, rental property managers and tradespeople who want an affordable, do-it-yourself way to revive calcite-based stone surfaces with minimal setup. It’s ideal for counters, small islands, backsplashes and interior floors that show light scratches or dulling but do not require full professional resurfacing. If your stone has deep gouges, heavy staining or large-scale damage, a professional restoration may still be necessary.