MERCURY Water-Separating Fuel Filter Canister 802893T for Remote-Mount Kits, Direct Replacement

Mercury 802893T is a direct-replacement water-separating fuel filter canister designed for remote-mount systems to help remove water and contaminants from outboard and MerCruiser fuel lines.

This replacement element fits remote-mounted water-separating filter kits and is engineered to work with many Mercury outboards and MerCruiser engines. Built to the manufacturer's specifications, the canister helps protect fuel delivery components by trapping moisture and particulates before they reach the engine. Installing a fresh filter at recommended intervals maintains fuel flow, supports engine efficiency, and can reduce corrosion risks in the fuel system.

How does this filter reduce water and contaminants in my fuel?

The 802893T uses a water-separating media and a sediment-trapping element to pull free water and particles out of the fuel stream. Water droplets are captured in the canister where they settle away from the fuel flow, while the filter media removes small particulates.

• Water-separating media captures and coalesces free water
• Filter element traps dirt, rust, and other debris
• Canister design allows water to settle for easier draining or servicing
• Factory-matched dimensions and fittings for remote mount kits

How often should I replace the Mercury 802893T canister?

Replace the canister at least once each season or follow the schedule in your engine owner’s manual based on operating hours and conditions. If you run in dirty fuel environments or notice fuel flow issues, swap the filter sooner to avoid performance problems.

• Standard recommendation: replace annually or per manual
• Change sooner after contaminated-fuel incidents or heavy use
• Inspect visually for water, discoloration, or clogging between changes
• Keep spare canisters aboard for quick field replacement

Will this canister fit my remote-mount fuel filter system?

The 802893T is intended as the replacement canister for Mercury remote-mounted water-separating filter kits. It matches the sizing and connection points used by those kits, but always confirm compatibility with your specific model and year prior to purchase.

• Designed for Mercury remote mount filter systems
• Check engine model and mount kit part numbers for fit confirmation
• OEM engineering ensures proper fit, sealing, and flow characteristics
• Available as a single canister—easy to swap with existing mount

How do I install and maintain the replacement canister?

Installation is straightforward when following the remote mount kit instructions: depressurize the fuel system, remove the old canister, position the new unit, and check for secure sealing. Routine checks for trapped water and visible contaminants will extend filter life and help spot issues early.

• Depressurize fuel system before servicing
• Replace canister and tighten to recommended torque or hand-tight spec
• Inspect for leaks and proper fuel flow after installation
• Drain accumulated water and inspect element during season if accessible

Who this is for: The Mercury 802893T canister is aimed at boat owners and technicians using Mercury outboards or MerCruiser engines with remote-mounted water-separating filter kits. It’s appropriate for recreational boaters, anglers, and fleet operators who prioritize reliable fuel filtration and ease of maintenance. If you want an OEM-grade replacement that matches Mercury’s fit and function standards and helps keep fuel cleaner and drier, this canister is a practical, field-serviceable option.