Micarun 7" Touch Screen Digitizer Glass for Chevrolet MyLink Radios LA070WV1-TD05 4-Pin — Replacement Panel (No LCD)

This Micarun 7-inch touch screen digitizer is a direct-fit replacement glass (4-pin) for Chevrolet Sonic, Spark, and Trax radios using LA070WV1-TD05, sold without the LCD panel.

If the front glass on your factory MyLink radio is cracked, unresponsive, or scratched, replacing the digitizer can restore touch functionality without swapping the entire display assembly. This Micarun part matches the LA070WV1-TD05 mounting and connector pattern used on Chevy Sonic (2012–2016), Chevy Spark (2012–2016), and Trax radio units (2012–2017). It is a glass touch panel only — the LCD screen is not included — designed for technicians and DIYers comfortable with radio disassembly.

Will this digitizer fit my Chevrolet radio?

Check your radio’s model number and vehicle year before ordering. The Micarun digitizer is engineered for radios using the LA070WV1-TD05 touch glass layout and a 4-pin cable interface. If your head unit has that model number and a matching connector location, this piece should align with the factory bezel, screw points, and mounting clips.

• Compatible models: Chevy Sonic 2012–2016, Chevy Spark 2012–2016, Chevy Trax 2012–2017.
• Connector: 4-pin touch cable only — no LCD included.
• Physical match for LA070WV1-TD05 radio housings and screw positions.

How difficult is installation and what tools or tips help?

Installation requires removing the factory radio from the dash and separating the broken glass from the existing frame. Experience with automotive trim, basic hand tools, and patience are important; this is a moderate-level DIY job or a quick task for any audio installer.

• Recommended: plastic trim tools, small screwdrivers, and steady work surface.
• Tip: mark screw locations with a marker and photograph each step for easier reassembly.
• Resource: multiple step-by-step replacement videos are available on YouTube for the LA070WV1-TD05 radio.

What exactly do I receive and what is not included?

You will receive the 7-inch Micarun touch screen digitizer (glass) with a 4-pin cable interface intended to replace a damaged touch surface. The product does not include the internal LCD panel, backlight board, or radio housing, so ensure your existing LCD is functioning before purchasing.

• Included: 7" touch digitizer glass and 4-pin touch flex cable.
• Excluded: LCD display, internal electronics, or trim/bezel pieces.
• Warranty: 12 months quality assurance from Micarun.

Will replacing the digitizer restore touch response and appearance?

Replacing just the glass will typically restore touch responsiveness if the underlying touch sensor and LCD remain operational. If the touch controller or LCD is damaged, a glass swap alone won’t resolve display or touch issues — diagnose the unit before replacing parts.

• Fixes: cracked glass, scratched surface, unresponsive touch due to broken digitizer layer.
• Does not fix: failed LCD pixels, backlight problems, or damaged internal electronics.
• Test before installation: power on the radio and confirm the LCD image and basic touch signals.

Who is this for: This Micarun digitizer is aimed at car owners, mobile audio shops, and DIY enthusiasts who have confirmed their Chevrolet LA070WV1-TD05 radio's LCD and internal electronics are working and need only the front touch glass replaced. It’s a cost-effective option for restoring the look and touch function of the factory MyLink unit without purchasing a full display assembly.