Muxlor Removable Engine Lift Bracket 5,600 lb Capacity for LS Plates, Quick-Mount, Corrosion-Resistant

Heavy-duty removable lift bracket that secures up to 5,600 lb per bracket for safely lifting crate engines with hoists, engine stands, slings, or levelers.

If you work on crate engines, swap motors, or move heavy powerplants around the shop, a dependable lift bracket is essential. The MUXLOR Tools 5600 lb removable engine lift bracket is designed to attach quickly to LS engine plates, engine stands, cradles, and hoists so you can move an engine with confidence. Built for compatibility with engine hoist chains, engine load levelers, transmission jacks, and truck cranes, this bracket streamlines the process of rigging and positioning engines for installation, testing, or transport.

How does this bracket attach to my LS crate engine plate?

The bracket slips onto standard lift points on many LS-style engine plates and secures with integrated mounting holes to accept bolts or quick-pins. Its removable design means you can install it when you need a lift and remove it for running stands or storage without modifying the engine plate. Corrosion-resistant finishes and reinforced welds keep the mounting points stable under load.

• Fits common LS engine lift plate configurations and bolt patterns
• Mounts quickly with bolts or quick-release pins
• Removable for engine test stands, cradles, or storage
• Durable finish and welds protect attachment points

Can I use this with my engine hoist, leveler, or crane?

Yes — each bracket is rated for 5,600 lb and is designed to pair with engine hoist chains, load levelers, lifting slings, or truck cranes. Attach the bracket’s lifting eye to your hoist hook, chain, or sling and use an engine leveler if you need to correct tilt during installs. Always match your hoist equipment and rigging to the bracket rating and local safety practices.

• 5,600 lb capacity per bracket (match rigging accordingly)
• Works with chains, slings, engine levelers, and crane hooks
• Use two or more brackets for balanced lifts when recommended
• Inspect rigging hardware regularly for wear and compatibility

What workshop tasks does this bracket make easier?

This bracket simplifies engine removal, installation, test-stand transfers, and transport within the shop. It speeds up mounting to engine stands on wheels, moving engines onto cradles, or securing a motor for dyno or break-in runs. The ability to remove the bracket after setup keeps your engine stand and run plate clear for other tasks.

• Quickly lift and lower crate engines for installations
• Transfer engines between hoist, stand, and crate with ease
• Configure lifts for transmission or drivetrain work using adapters
• Supports workshop workflows like dyno testing and bench work

How should I inspect and maintain the lift bracket?

Regular inspection prevents failure: check welds, eyelets, and mounting holes before each lift and replace any worn or deformed hardware immediately. Keep mating surfaces clean and tighten bolts to the engine plate’s specified torque. Store brackets dry and consider a light protective coating if used in corrosive environments.

• Visually inspect welds, eyelet, and hardware before every lift
• Replace damaged bolts, pins, or chains — do not improvise
• Torque mounting bolts to engine plate specifications
• Store in a dry area; reapply protective finish if needed

Who is this for: MUXLOR’s removable 5,600 lb engine lift bracket is built for professional mechanics, home engine builders, race shops, and restoration enthusiasts who handle heavy crate engines and demand repeatable, safe rigging. If you operate engine hoists, load levelers, test stands, or truck cranes and need a removable, high-capacity lift point that works with LS-style plates and common engine stands, this bracket is a practical addition to your shop toolkit.