Nirakoka Universal Shock Reservoir Mounting Bracket Kit 2.0/2.5in — Heavy‑Duty Clamps, Flat‑Surface Mount

The Nirakoka Universal Shocks Reservoir Mounting Bracket Kit 803-02-042 is a complete hardware set that lets you fasten any 2.0" or 2.5" diameter shock reservoir to flat metal surfaces quickly and securely.

If you run aftermarket shock reservoirs or need to relocate existing ones, this kit supplies the bracketry and clamps to mount them where factory provisions don’t exist. It’s designed as a universal solution so technicians, fabricators, and DIY enthusiasts can attach reservoirs to frames, skid plates, roll cages, or custom brackets without fabricating parts from scratch.

How does this bracket kit make reservoir installation simpler?

The kit consolidates the common parts needed for mounting into one package, eliminating trips to the hardware store and guesswork about clamp sizes. It is engineered to accept both 2.0" and 2.5" reservoir diameters and works on any flat metal plane, saving time during mock-up and final installation.

• Includes heavy-duty hose clamps sized for standard reservoir diameters
• Mounting bracket accepts flat-surface attachment with supplied screws
• Pre-drilled holes and standardized hardware reduce fabrication time
• Universal fit minimizes the need for custom adapters

What parts are included and how do they fit different reservoirs?

The kit contains a formed mounting bracket, multiple hose clamps, and mounting fasteners so you can match the bracket to common reservoir sizes. The clamps wrap around the reservoir body and secure to the bracket, while the fasteners anchor the assembly to flat metal surfaces like frames or skid plates.

• Formed steel bracket compatible with 2.0" and 2.5" reservoirs
• Assorted heavy-duty hose clamps for a tight wraparound fit
• Mounting screws and washers for secure attachment to metal
• Hardware packaged together for straightforward installation

Will this hold up under vibration and harsh driving conditions?

The components are chosen to resist loosening and to keep the reservoir stable under typical off-road and performance driving loads. Proper torque on the clamps and screws, plus using the flat-surface mounting location recommended, ensures the assembly stays secure during sustained vibration.

• Heavy-duty clamps minimize movement and slippage
• Rigid bracket design distributes load across a flat surface
• Fasteners included to achieve recommended clamping force
• Intended for vehicle and motorsport environments, not permanent structural loads

How do I confirm compatibility before buying?

Measure the outer diameter of your reservoir and the available flat mounting area on your vehicle. This kit fits reservoirs with 2.0" or 2.5" outer diameters and requires a flat metal surface to accept the bracket and screws; confirm those dimensions before purchase.

• Check your reservoir OD against 2.0" or 2.5" sizes
• Verify there is sufficient flat metal area for bracket seating
• Ensure access for clamp tightening and screw installation
• Contact Nirakoka customer service if unsure about fitment

Who this is for: The Nirakoka Universal Shocks Reservoir Mounting Bracket Kit 803-02-042 suits mechanics, off-road builders, and weekend fabricators who need a ready-made mounting solution for common shock reservoirs. It’s ideal when you want to avoid custom brackets, simplify installations, or add remote reservoirs to performance suspension setups that lack factory mounting points. If you have a 2.0" or 2.5" reservoir and a flat metal mounting surface, this kit provides the clamps, bracket, and screws to complete the job with minimal extra hardware.