NORTHWEST ENTERPRISES Ultrasonic Carburetor Cleaning Solution, 2 Gal Concentrate for Engine Parts

Powerful ultrasonic concentrate designed to dissolve varnish, gum, carbon and grime from carburetors and small engine parts when used with an ultrasonic cleaner.

Engine and small-parts cleaning demands a fluid that reaches tight passages, lifts baked-on deposits and rinses clean without harming delicate metal surfaces. NORTHWEST ENTERPRISES Ultrasonic Carburetor Cleaning Solution is a concentrated formula made specifically for immersion in ultrasonic cleaning tanks. It leverages cavitation—the rapid collapse of microscopic bubbles generated by ultrasonic energy—to dislodge contaminants from exterior surfaces, blind holes and internal passages that brushes and sprays cannot reach.

How does this solution remove deposits that sprayers and manual scrubbing miss?

The cleaning action depends on tiny implosions created by ultrasonic transducers in the tank. Those micro-bubbles collapse against wetted surfaces and generate shear forces that lift and suspend varnish, gum, carbon and oil residues.

• Penetrates minute cracks, orifices and passageways where brushes cannot reach.
• Suspends contaminants in solution for simple rinse-off or filtration.
• Reduces manual labor and avoids abrasive scrubbing that can damage parts.

Is the formula safe for the metals used in carburetors and engine components?

This concentrate is formulated to be compatible with a wide range of metals common in engines and small parts. It avoids aggressive ingredients often associated with corrosion and includes no borates, phenols, nitrates, or other listed hazardous additives noted in many regulatory lists.

• Safe for aluminum, aluminum alloys, brass, copper and copper alloys.
• Suitable for cast iron, steel, ferrous metals, magnesium and zinc alloys.
• Formulated to limit attack on soft metals while still removing stubborn deposits.

How quickly will parts be cleaned using this ultrasonic cleaner fluid?

Cleaning times depend on contaminant type and ultrasonic power, but the cavitation effect concentrates mechanical action on contact points so most parts clean far faster than hand methods. Heavier carbon or baked lacquer may require repeated short cycles or pre-soak for optimal results.

• Light grime and fresh deposits often release in minutes.
• Baked varnish, fuel gum or heavy carbon may take multiple cycles or a brief pre-soak.
• Concentrated formula allows adjusting strength for faster action when needed.

What practical precautions and steps should I follow when using the concentrate?

Use the product only in purpose-built ultrasonic tanks and follow the tank manufacturer’s dilution and temperature recommendations. Rinse parts thoroughly after cleaning and inspect seals or non-metal components for compatibility before immersion.

• Mix the concentrate to the recommended ratio for your ultrasonic unit and workload.
• Maintain recommended tank temperature for best cavitation performance.
• Rinse and dry parts after cleaning; filter or change fluid when it becomes heavily loaded.

Who is this for? NORTHWEST ENTERPRISES Ultrasonic Carburetor Cleaning Solution is aimed at mechanics, restoration hobbyists, machine shops and anyone who restores or maintains carburetors, valves, jet assemblies, small engine parts and precision components. It suits users who have an ultrasonic tank and need a concentrated, effective cleaner that reaches tight passages without harsh, listed hazardous additives. Choose the two-gallon size for workshop refills, small-batch production or frequent maintenance cycles.

Ingredients

Non-Toxic Ingredients