OER glass setting tape 5 ft roll — 1/32" thick, 1-1/2" wide for GM windows, non-stretch moisture seal

If you’re restoring or repairing a GM vehicle and need a reliable way to seat window glass, this pre-cut 5-foot roll provides a stable, moisture-resistant barrier between glass and metal. Made to hold glass firmly without stretching, the tape forms a long-lasting seal against dirt and water when folded over the glass edge and tucked into the frame channel.

How do I install the OER glass setting tape in my vehicle?

Installation is straightforward and done with basic tools. Fold the tape over the glass edge so the adhesive or gripping side contacts the glass, then guide the assembly into the metal frame or channel and trim excess material flush with a utility knife or razor blade.

• Fold tape over glass edge for a two-sided cushion.
• Insert glass-plus-tape into the channel, pushing evenly along the length.
• Trim remaining tape with a sharp knife for clean edges.
• Use one 5 ft roll per short window or additional rolls for larger panes.

Will this tape fit my GM model window channel?

This OER roll is specified to match common GM glass setting dimensions and is sold under part reference GT0116. The tape’s 1-1/2" width and 1/32" thickness are designed to sit correctly in many GM-style channels, but verify channel clearance before final installation.

• Check channel depth and flange width against 1-1/2" tape width.
• Confirm 1/32" thickness will compress into the channel without bulging.
• Use trial fit on a small section before applying along full edge.

What performance can I expect from this setting tape over time?

OER’s material resists stretching and provides a lasting mechanical hold for the glass while helping block dust and moisture entry. It’s engineered to maintain shape so the seal won’t loosen under normal temperature and vibration conditions associated with road use.

• Non-stretch design preserves glass position over time.
• Creates a dirt- and moisture-resistant barrier when properly seated.
• Simple mechanical grip—no special adhesives required for many installs.

How much tape do I need and what tools are required?

Each roll supplies five feet of tape, suitable for smaller windows or partial edge repairs; larger assemblies may require multiple rolls. Installation requires only basic hand tools: a utility knife or razor for trimming, and steady pressure to seat the tape into the channel.

• One roll = 5 feet of setting tape (1-1/2" wide, 1/32" thick).
• Tools: utility knife/razor blade and steady hand or small roller for seating.
• Purchase additional rolls for full-door or windshield applications.

Who is this for: Technicians, restoration enthusiasts, and DIY mechanics working on GM vehicles who need a straightforward, stable glass setting solution will appreciate this OER roll. It’s intended for panel and window reinstalls where a long-lasting mechanical seal and resistance to dirt and moisture are required without complex adhesives or proprietary tooling.