ORCISH 10 Ton Snatch Block Pulley — 22,000 lb Capacity, Fits 0–3/4" Rope, Heavy-Duty Coated Steel

When a winch needs more mechanical advantage or a change of rope direction, a reliable snatch block is essential. The ORCISH 10 Ton Snatch Block is built from thick steel with anti-corrosion coatings and fits most 0–3/4" steel cables or synthetic ropes. Designed for trucks, tractors, ATVs and UTVs, this block increases pulling power, reduces winch strain and helps you navigate obstacles during off-road recoveries.

How does this snatch block increase my winch's pulling power?

By routing the rope through the pulley, the snatch block creates mechanical advantage and effectively halves the load seen by the winch motor. That means you can pull heavier loads or free stuck vehicles with less heat and amp draw from the winch.

• doubles traction by creating a 2:1 mechanical advantage
• reduces motor heat and gear stress during long pulls
• compatible with 0–3/4" cable or synthetic rope for flexible use

What safety or build features help with reliable field use?

The ORCISH block uses upgraded circlips centered in the pulley to keep synthetic or steel ropes aligned and prevent off-center loading. Heavy-gauge steel construction and anti-corrosion finish improve longevity in harsh outdoor environments.

• upgraded centered circlip reduces unilateral rope jams
• solid steel body with protective coating for corrosion resistance
• rated to 10 tons (22,000 lbs) with clear rope-size compatibility

How do I use the block to change pull direction or navigate obstacles?

Open the snatch block, place the winch line around the sheave, and reclasp the block so the rope sits in the circlip center. This lets you wrap the rope around anchor points or trees and redirect the pull angle while maintaining mechanical advantage.

• open block, seat rope on sheave, ensure rope rests in circlip center
• use with a secure anchor (tree strap or shackle) to redirect pull
• ideal for going around obstacles without increasing winch load

What maintenance should I perform to keep this pully working well?

Inspect the block before each use for deformation, and keep moving components lightly greased to reduce wear. Replace the block if any structural damage appears, and keep the rope centered on the circlip during operation to avoid asymmetric forces.

• check for bends, cracks or deformation before use
• apply grease to the sheave and pivot points periodically
• store dry and clean to protect the anti-corrosion coating

Who is this for? The ORCISH 10 Ton Snatch Block is made for off-road enthusiasts, farmers, landowners and recovery professionals who use portable or vehicle-mounted winches. If you routinely recover 4x4s, trucks, ATVs or UTVs, need to navigate around trees or obstacles, or want to reduce wear on your winch motor and battery during demanding pulls, this block is a practical, heavy-duty accessory to add to your recovery kit.