Partsam 2-Inch 9-LED Smoked Lens Side Marker & Clearance Lights — 4pc (2 Amber + 2 Red), Waterproof Flush-Mount

Partsam 2-inch 9-LED smoked-lens marker lights are compact, waterproof truck and trailer side marker or clearance lights sold as a 4-piece set (2 amber and 2 red) with grommets and pigtails for easy flush-mount installation.

These Partsam lights are designed to replace small incandescent or older LED markers where space is limited but visibility is essential. Each round lamp contains nine diodes behind a smoked lens and a faceted mirror-reflector to boost light output while keeping a low-profile look. The housing is sonically sealed to keep moisture out, and the kit includes rubber grommets and pigtail connectors so you can mount them without screws and wire them to a standard 2-prong plug.

How bright are these 9-LED smoked marker lights in real use?

The nine-diode layout plus the mirror-reflex reflector produces noticeable brightness at night without being dazzling to oncoming drivers. The smoked lens tones the raw LED intensity for a subtler appearance while still meeting visibility needs for side marking and clearance tasks.

• 9 high-output LEDs per lamp for consistent illumination.
• Smoked lens reduces glare and creates a low-profile look.
• Reflector geometry increases perceived brightness straight-on.
• Available in amber for front/side and red for rear/side applications.

What does installation require and will these fit my trailer?

These lights are made for flush-mounting into a rubber grommet; no screws are required. Typical installation calls for a roughly 2-1/4" hole; the package supplies grommets and pigtails that plug into a standard 2-prong connector. Heating the grommet briefly can make insertion easier into tight metal or fiberglass panels.

• Flush-mount design with supplied rubber grommets and pigtails.
• Accepts standard 2-prong plug wiring for quick connection.
• Drill a ~2-1/4" hole; grommet stretches to fit snugly.
• No screws needed — lights seat tightly in the grommet for secure fit.

Are these lights weatherproof and durable for road use?

The lens and housing are sonically sealed to form a single waterproof unit that resists water intrusion and protects the circuit board and diodes. Their compact design reduces exposure to impact, and the sealed construction helps prevent corrosion in wet or salty conditions.

• Sonic-sealed housing prevents water from reaching electronics.
• Compact profile limits physical snagging and impact area.
• LEDs reduce heat and increase service life compared with incandescents.
• Designed for 12V vehicle electrical systems common on trucks/trailers.

Can one of these lights serve as both a side marker and a clearance light?

These lamps are visible directly in front but have limited lateral visibility. They are suitable as either a side marker or a clearance light, but they are not engineered to reliably perform both functions from the same mounting point. If you need simultaneous full-angle visibility, plan to install two separate fixtures.

• Clear straight-on visibility makes them good for clearance marking.
• Reduced side-angle output limits use as a dual-purpose light.
• Install separate side and front/rear lights for full multi-angle coverage.

Who is this for: The Partsam 4-piece 2" 9-LED smoked-lens set is intended for truck and trailer owners, fleet managers, and DIYers who need compact, bright, and weatherproof marker or clearance lights. Choose this kit if you want modern LED performance in a low-profile housing, supplied grommets and pigtails for quick flush mounting, and a mixed amber/red set for proper front/side and rear/side placement.