Partswcgg 6" Oval LED Trailer Tail Backup Light Kit — 2 Oval Stop/Turn/Reverse Lights, 13.8" Brake Bar, 25ft Harness

The Partswcgg 6" Oval LED Trailer Tail Backup Light Kit is a complete lighting set that combines two oval stop/tail/turn lights with built-in reverse LEDs, a 13.8" third-brake LED bar, six mini marker lamps, a 25-foot 5-pin harness, steel mounting brackets and reflective stickers for ready-to-install trailer illumination.

Replace, upgrade or outfit a trailer with a single kit that covers rear signaling, backup illumination and side clearance markers. This bundle is designed for heavy-duty use: the oval lights include white reverse diodes, the brake bar gives a distinct center stop signal, and the wiring harness uses a 5-pin flat plug specifically matched to these oval lights. All components are sealed for wet-weather performance and arrive with steel mounting brackets and adhesive reflectors for visibility after sunset.

How do these lights improve trailer visibility when backing up?

Each 6" oval lamp integrates white LEDs dedicated to reverse function, positioned to shine rearward without affecting the stop/turn arrays. The backup diodes turn on with the harness-provided reverse circuit, lighting the area directly behind the trailer for safer maneuvering in low light.

• Built-in white reverse LEDs in each oval housing for clear rear illumination
• 25-foot wiring harness with separate reverse circuit for consistent power
• Steel mounting brackets let you aim lights for optimal coverage

What connections and wiring colors should I expect during installation?

The kit uses a 5-pin flat plug made to work with these oval lights plus an extra bullet-style lead for the reverse feed. Wire color functions are straightforward so you can match to most trailer harnesses or splice into a vehicle feed.

• White = ground; black = low-brightness tail running light
• Red = high-brightness stop/turn/brake function
• Blue-attached bullet plug powers the oval reverse LEDs independently

Are the lights durable and weather-resistant for road use?

All housings are fully sealed to an IP68 level, making them resistant to dust and immersion for dependable performance in rain, mud and splashes from rough roads. The included steel brackets are coated to reduce corrosion and preserve mounting strength over time.

• IP68-rated sealing protects LED arrays and internal wiring
• Heavy-duty coated steel brackets resist rust and maintain secure mounting
• Reflective stickers add passive visibility when lights are off or parked

What does the kit include and how will it fit different trailer types?

This single purchase supplies a full rear lighting solution plus marker lights for common trailer requirements. The components are surface-mount friendly and the long harness lets you route wiring on small utility trailers or larger flatbeds with room to spare.

• Two 6" oval LED stop/tail/turn lights with white reverse LEDs and steel brackets
• One 13.8" red LED third-brake identification light bar with three-wire operation
• Six mini LED side/clearance marker lights (four red, two amber standard locations)
• 25-foot 5-pin flat wiring harness tailored for oval lights and four reflective stickers

Who is this for? The Partswcgg kit targets trailer owners, fleet maintainers and DIY mechanics who want a reliable, weatherproof rear lighting upgrade that includes backup illumination and a center brake bar. It’s appropriate for utility trailers, flatbeds, small trucks and any trailer application needing surface-mount lights and a plug-and-play wiring harness. If you need easy-to-install, high-visibility rear lighting with hardware and wiring included, this kit covers the essentials for safer road operation.