Poli Glow Microfibre Mitt Applicator — Damp mitt for even, streak-free Poli Glow application

The Poli Glow® Mitt Applicator is a damp microfibre mitt engineered to replace the 7" chamois and deliver smooth, even Poli Glow coatings with controlled product application and minimal streaking.

Whether you’re refinishing a countertop, restoring cabinetry, or applying Poli Glow to wood trim, the right applicator affects coverage, curing behavior, and final sheen. The Poli Glow Mitt combines a soft microfibre surface with a recommended damp application method so Poli Glow spreads evenly without overloading, drips, or circular marks that can mar the finish.

How should I prep the Poli Glow Mitt before use?

Preparing the mitt correctly ensures consistent pickup and release of product. Start by thoroughly wetting, wringing, and then enclosing the mitt in a towel to remove excess moisture; the mitt should be damp but not dripping. During longer jobs, rinse and re-wring the mitt as needed so it remains at the ideal moisture level.

• Dampen the mitt with fresh water, then wring out thoroughly.
• Wrap in a towel and wring again to achieve a moist, not wet, feel.
• Re-rinse occasionally during use to prevent product buildup.
• Wear rubber or plastic disposable gloves under the mitt for cleanliness and grip.

What is the proper technique to apply Poli Glow with this mitt?

Application technique determines the smoothness and uniformity of the cured surface. Pour several thin lines of Poli Glow onto the palm of the mitt and wipe across the substrate in straight, even strokes — either top-to-bottom or side-to-side — working in manageable 4' x 6' sections. Avoid circular motions; allow each thin coat to set for 1–2 minutes depending on temperature before applying another layer.

• Drizzle Poli Glow lines onto the mitt’s palm for controlled dosing.
• Wipe in one direction across a 4' x 6' area — no circular rubbing.
• Apply thin coats; each typically dries in 1–2 minutes.
• Apply at least six coats before moving to the next section.

Why use a microfiber mitt instead of a traditional chamois?

Microfiber offers superior pick-up and uniform release compared with standard chamois, reducing streaks and pooling. The fabric's structure helps distribute Poli Glow evenly and is easier to rinse when it accumulates product, which keeps the working surface consistent throughout application.

• Microfiber reduces streaking and improves spreadability.
• Easier to rinse and maintain during long sessions than chamois.
• Soft surface minimizes surface disturbance for a smooth finish.
• Designed to work with the damp-mitt application method for controlled coats.

Who is this for? The Poli Glow Mitt Applicator is intended for DIYers and professionals who apply Poli Glow finishes and want consistent, repeatable results across furniture, woodwork, and surfaces that require a clear, even coat. It suits users who prefer a controlled damping technique, need to apply multiple thin coats quickly, and value a soft, rinseable applicator that reduces wasted product and surface defects. Follow the recommended dampening and stroke method, use protective disposable gloves under the mitt, and plan for multiple thin coats for best outcomes.