Polymix Metal Panel Bond 60 adhesive — 50ml cartridge with 2 mixing nozzles, two‑part urethane high initial grab

Polymix Metal Panel Bond 60 is a professional two‑part urethane adhesive supplied in a 50ml cartridge with two precision mixing nozzles, designed to securely bond steel and aluminum panels during automotive repair.

This cartridge kit provides a controlled, ready‑to‑use solution for panel replacement and collision repair. The adhesive comes in a yellow‑label 50ml cartridge that fits standard applicators and includes two disposable mixing nozzles to ensure a correct mix ratio at the point of application. Its formulation is tuned for metal‑to‑metal bonding so technicians can replace quarter panels, roofs, doors, box sides and other sheet‑metal sections without relying on mechanical fasteners alone.

How does this adhesive perform during panel replacement?

The Polymix Metal Panel Bond 60 delivers high initial grab and cured strength suited to vehicle body repair. Its two‑part urethane chemistry provides a durable bond that resists shear and vibration typical of automotive service conditions.

• Two‑part urethane for stable bond strength after cure
• Yellow label indicates specific working time for controlled application
• Good shear and peel performance for welded or riveted joints
• Designed to work on both steel and aluminum substrates

Do I need to prime or pre‑treat metal before using it?

No primer is required for most metal surfaces, according to the product design. The formula allows direct application to clean bare metal, which speeds up repair workflows, though standard surface prep such as degreasing and abrading is recommended for best adhesion.

• No primer required for typical steel and aluminum panels
• Best results with clean, dry, and abraded surfaces
• Remove oil, rust scale and contaminants before applying
• Adheres to commonly used automotive sheet metals without extra coatings

What tools and application steps are needed to use the cartridge?

Polymix Metal Panel Bond 60 fits manual or pneumatic cartridge guns compatible with 50ml cartridges. Attach one of the supplied mixing nozzles, dispense until mixed material flows continuously, and apply bead or ribbon patterns to the mating surface, then clamp panels in position until the adhesive sets.

• Compatible with standard 50ml manual or pneumatic applicators
• Use supplied mixing nozzles for proper two‑part mixing
• Apply continuous beads, then mate and clamp panels for curing
• Trim or finish cured joint per repair plan after full cure

How long will I have to work with the material before it sets?

The yellow‑label cartridge identifies this Metal Panel Bond 60 formulation and its working time characteristics. Working time depends on temperature and substrate; plan dispensing and panel positioning accordingly to make use of the controlled open time.

• Working time optimized for precise placement and adjustment
• Warmer temperatures shorten working time; cooler temperatures lengthen it
• Follow shop standard procedures for clamping and time to handling strength
• Full cured properties develop after recommended post‑cure interval

Who is this for: Polymix Metal Panel Bond 60 is aimed at collision repair technicians, body shop professionals and automotive restorers who need a reliable, professional‑grade adhesive for sheet‑metal panel replacement. It supports typical repair workflows by eliminating a separate primer step on most metals and provides a compact 50ml cartridge size for targeted repairs or test fits. If you perform quarter‑panel, roof, door skin or box side replacements and require consistent, mixed dispensing and high bond performance, this kit with two mixing nozzles gives a controlled, shop‑ready option.