QWORK Wireless Winch Remote Kit, 2-Pack 12V/24V for Truck & ATV, IP65, 9,000 lb

QWORK 12V Car Wireless Winch Remote is a two-transmitter kit that converts solenoid-driven winches into a safe wireless system for trucks, ATVs and SUVs.

This compact 5-wire remote-control kit provides hands-free operation of most solenoid-driven winches rated up to 9,000 lbs and works with vehicle electrical systems from 12–24V. Designed to trigger the relay coil rather than drive the motor itself, the kit includes clear wiring (red for positive, black for ground, yellow/blue for direction) and an IP65-rated receiver to stand up to dust and light moisture on the trail.

How does the QWORK wireless winch remote improve on-board winch control?

The QWORK kit removes the need to stand next to the winch or remain tethered to a wired remote, giving you the freedom to position yourself for safer rigging and better visibility. With a visual indicator on the transmitter you get immediate feedback when a command is sent, reducing guesswork during recovery.

• Effective wireless range up to approximately 10 feet for close, controlled operation.
• Visual indicator light shows transmit operation and troubleshooting status.
• Designed to switch the relay coil—not to supply motor current—protecting the control circuitry.

Which vehicles and winches are compatible with this 5-wire kit?

The receiver accepts DC 12–24V input and is suitable for most solenoid-driven winches, including many models installed on trucks, ATVs and SUVs. It supports winches with a pulling capacity up to 9,000 lbs, but installation must match your winch’s wiring configuration.

• Compatible with solenoid-driven winches operating on 12–24V systems.
• Rated for winches with maximum pulling power up to 9,000 lbs.
• Wiring code: red = +, black = ground, yellow/blue = directional control.

What should I know about installation and troubleshooting?

Installation is straightforward when following the manufacturer wiring: the unit actuates the winch relay coil, so be sure the relay and battery are in good condition. The kit includes an indicator light to confirm transmissions; intermittent clicking or lack of movement often points to low battery voltage or relay contact issues.

• Install per instructions and verify relay contacts and vehicle battery condition first.
• Intermittent clicking likely indicates insufficient battery voltage—charge the battery before diagnosing.
• If a single click is heard with no movement, inspect the relay contacts or replace them as needed.

How durable and reliable is the system outdoors?

The receiver is built to IP65 protection class, offering resistance to dust and light water exposure commonly encountered in off-road use. The transmitters are compact and include an operation indicator light; however, keep electronics protected from prolonged submersion or extreme environments.

• Receiver rated IP65 for dust resistance and light water protection.
• Compact transmitters with indicator lights for quick operation confirmation.
• Not intended to power the winch motor directly—acts as a relay coil controller for safety.

Who is this for: The QWORK 12V Wireless Winch Remote Kit suits off-roaders, tow operators and outdoor enthusiasts who want a reliable, compact wireless trigger for solenoid-driven winches up to 9,000 lbs. It’s ideal for anyone replacing a hard-wired remote, adding a secondary control point, or upgrading to hands-free winch operation—provided they follow wiring guidance, maintain battery health, and ensure relay compatibility.