Racewill Titanium Pipe Shield 6" x 24" Exhaust Heat Shield — Titanium Outer, Silica Lining, Gloves Included

Racewill Titanium Pipe Shield is a flexible, double-layer 6" x 24" exhaust heat shield that reduces surface temperatures and protects surrounding components during high-heat operation.

The Racewill 6" x 24" Titanium Pipe Shield combines a titanium outer layer with a silica inner lining to deliver robust thermal protection for mufflers, exhaust pipes, and hot ducting. Designed for universal fit and straightforward installation, it uses an air-gap mounting concept, upgraded rivet hardware, and an adjustable hose clamp so you can adapt it to round, oval, or irregular pipes. A pair of gloves is included to protect your hands while fitting the shield to hot or sharp surfaces.

How does this shield lower heat transfer to nearby parts?

The shield reduces heat transfer through a layered construction and deliberate spacing that interrupts conductive and radiant heat paths. The outer titanium reflects radiant heat while the inner silica fabric resists high temperatures and prevents direct conduction to the pipe surface.

• Titanium outer layer reflects infrared heat for lower surface temperatures.
• Silica inner fabric tolerates extreme temperatures without breakdown.
• Bracket design creates an air gap, increasing cooling and convective dissipation.
• Can handle short-term exposures up to 1350°F at the outer surface.

Will this fit my exhaust pipe or custom tubing?

The Racewill shield uses a flexible body and a removable 3.5" hose clamp, which lets you contour and tighten it around many pipe shapes and sizes. Its universal sizing makes it suitable for most 6" diameter applications and for adapting to oval or irregular pipes with some shaping.

• Flexible panel conforms to round, oval, or bent pipes.
• Removable hose clamp provides easy repositioning and secure mounting.
• Washers under rivet heads improve long-term durability during installation.
• Trim or overlap options allow custom coverage along the pipe length.

How simple is the installation, and what tools are needed?

Installation is intended to be straightforward: position the shield, secure with the included clamp, and tighten until snug. Basic hand tools are sufficient, and the included gloves protect your hands from sharp edges and hot surfaces while you work.

• Hand tools like a screwdriver or small ratchet for the hose clamp.
• Included gloves protect against heat and abrasion during fitting.
• Pre-fitted rivet washers reduce risk of rivet failure during tightening.
• Clamp is removable so you can adjust placement after initial fitting.

What maintenance or care does the shield require?

Maintenance is minimal: periodically check the clamp and rivets for tightness and inspect the shield for damage after heavy use or impacts. Clean with a soft brush or damp cloth—avoid harsh solvents that could degrade the silica layer.

• Inspect fasteners and clamp periodically for looseness.
• Wipe away debris with a damp cloth; avoid aggressive chemicals.
• Replace if the inner fabric shows severe fraying or burn-through.
• Store in a dry place when not installed to prolong lifespan.

Who this is for: The Racewill Titanium Pipe Shield is aimed at mechanics, fabricators, motorcycle and automotive enthusiasts, and anyone who needs a dependable, adaptable way to lower heat exposure to wiring, plastics, bodywork, or cabin areas. It suits professionals and DIYers who want a durable, easy-to-fit solution that balances reflective titanium protection with high-temperature silica insulation.