RUST BULLET Metal Blast Rust Remover & Etching Prep — 1 Gal Industrial Cleaner for Metal

RUST BULLET Metal Blast is a 1‑gallon industrial cleaner that removes rust, etches bare metal, and conditions surfaces for improved paint adhesion.

Metal Blast is formulated to dissolve surface rust and leave a properly etched metal substrate ready for primers or coatings. It works as a cleaner and etching prep in one step, reducing the need for aggressive sanding or mechanical abrasion on a wide range of ferrous and nonferrous metals. The product is supplied in a one‑gallon container suited to shop, restoration, and maintenance settings where consistent, repeatable surface preparation matters.

How does Metal Blast remove rust and what does ‘etching’ mean?

Metal Blast contains active agents that chemically break down surface rust and lift corrosion so it can be rinsed or wiped away. The etching action lightly abrades metal at a microscopic level, promoting mechanical keying for primers and paints without heavy sanding.

• Dissolves surface oxidation for easy removal
• Leaves a uniformly etched profile that improves coating bite
• Works on steel, iron, aluminum, and some alloys when used as directed

How do I use this product safely and effectively in my shop?

Application is straightforward: apply Metal Blast to the affected area, allow the formula to work, then rinse or wipe off residue. Routine safety measures—gloves, eye protection and adequate ventilation—are recommended to protect users and surrounding finishes.

• Spray or brush onto surface, let dwell briefly
• Rinse with water or wipe with a clean cloth to remove dissolved rust
• Dry the metal fully before priming or painting to prevent flash rust

Will Metal Blast affect paint, coatings, or metal dimensions?

Metal Blast is designed to target corrosion and prepare bare metal rather than strip intact coatings; however, it can soften some old paints and reactive finishes. It does not remove significant base material or change metal thickness when used as directed, but always test in an inconspicuous spot first.

• Safe for preparation before primers and topcoats when properly rinsed
• May alter weak or flaking old paints—test first on coated surfaces
• Does not sandblast or mechanically remove metal—chemical cleaning only

Who is this for? Metal Blast is intended for mechanics, restorers, fabricators, and maintenance teams who need a reliable rust remover that also preps metal for coatings. It suits automotive restoration, industrial repairs, marine maintenance, and DIY metalwork where consistent adhesion and clean metal are priorities. For large production or specialty alloys, run a small compatibility test before full application.

Ingredients

cleaner