Shineyoo Fuel Line Hose Kit 6-Size 5ft NBR Rubber with 30 Clamps — 1/8"–1/2" Push-Lock, Reinforced for Small Engines

Shineyoo's 6-size fuel line kit delivers six common inner-diameter rubber fuel hoses (each 5 ft) plus 30 clamps so you can replace, reroute, or repair fuel lines on small engines quickly and reliably.

This kit collects the most often needed fuel tubing sizes—1/8", 3/16", 1/4", 5/16", 3/8" and 1/2"—all made from reinforced NBR rubber with braided polyester fibers for extra strength. Each hose length is five feet, giving you enough material for multiple repairs or custom runs. The package also includes 30 clamps sized to match the hoses so you won’t need additional fasteners when replacing lines on lawn mowers, ATVs, cultivators, tractors or other small engine equipment.

What materials and performance specs should I expect from these hoses?

The Shineyoo hoses are constructed from nitrile butadiene rubber (NBR) reinforced with braided polyester fibers, designed for fuel resistance, flexibility and longer service life. Wall thickness is approximately 3 mm, supporting higher working pressures for small-engine fuel systems.

• Material: NBR rubber with polyester braid for reinforcement
• Wall thickness: ~3 mm for durability and flexibility
• Working pressure: up to 300 PSI; burst pressure: up to 1200 PSI
• Temperature range: -40°F to 257°F (-40°C to 125°C)

How will this kit save me time when repairing equipment?

Having six common hose sizes and 30 matching clamps in one kit eliminates trips to buy single-size tubing or mismatched clamps. The push-lock friendly inner diameters make swapping old lines straightforward, so you can finish field or shop repairs faster.

• Multiple sizes on-hand for quick replacements without measuring and cutting for every repair
• Five-foot lengths give enough spare material for routing and multiple fixes
• Clamps included—no need to source fasteners separately
• Flexible tubing simplifies routing around brackets and tight engine bays

Which machines and systems is this kit compatible with?

These push-lock rubber fuel hoses are intended for a wide range of small-engine and light automotive uses. They suit many fuel delivery and related fluid lines but always verify pressure and chemical compatibility for your specific application.

• Small engines: lawn mowers, cultivators, tillers and generators
• Off-road vehicles: ATVs, UTVs and dirt bikes (verify fit and pressure)
• Farm equipment: compact tractors and utility machines
• Light automotive jobs: low-pressure fuel lines, oil cooling, vapor lines (check specs first)

How should I install, cut, and secure these hoses safely?

Cut the tubing squarely with a sharp hose cutter to ensure a tight seal at fittings. Slide the correct-sized clamp over the hose end, push the hose fully onto the barb or fitting, then tighten the clamp to a snug, leak-free fit—avoid over-tightening which can damage the hose.

• Measure and mark, then cut with a clean, square cut for best sealing
• Use the matching clamp size from the kit and tighten until snug, not crushed
• Route away from heat sources and sharp edges; use zip ties or clamps to secure
• Check for leaks under low pressure first, then at operating pressure

Who this kit is for: This Shineyoo fuel line set is aimed at DIY mechanics, lawn and garden professionals, small-farm operators and hobbyists who maintain ATVs, tractors, lawn mowers, cultivators or other small-engine machinery. If you want a single, organized kit with a range of common diameters, durable NBR construction, and enough clamps to complete several repairs without a parts run, this provides a practical, cost-effective solution. Always match hose size and pressure rating to your equipment and perform routine inspections after installation.