Shineyoo Silicone Vacuum Tubing Kit — 6 x 10ft Hoses (1/8"–3/8" IDs), 3mm Wall, High-Temp/High-Pressure

Shineyoo Silicone Vacuum Tubing Hose Kit supplies six common inner diameters in 10-foot lengths of 3mm-wall silicone hose engineered for high-temperature, high-pressure automotive and general-purpose vacuum or fluid routing.

This kit gathers the most frequently used vacuum and small-bore fluid hose sizes—1/8", 5/32", 3/16", 1/4", 5/16" and 3/8"—each at 10 feet of upgraded 3mm-wall silicone. The material resists high and low temperatures, stays flexible without collapsing or kinking, and offers working and burst pressures suitable for engine bays, marine systems, custom fabrications, and DIY repairs.

What hose sizes are included and how much length do I get?

The kit contains six hoses, each 10 feet long, in the most commonly required inner diameters for vacuum lines and small fluid runs. That makes it easy to replace worn factory lines or to stock up for multiple projects without buying different rolls.

• Included IDs: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8"
• Each size supplied in a single 10-foot length
• Total material: 60 feet across six sizes for varied applications

How tough is the silicone—will it kink or collapse under pressure?

Shineyoo uses a thicker 3mm wall on these silicone tubes to resist collapsing and to minimize kinking when routed around tight bends. The hoses are rated for elevated working and burst pressures and hold flexibility across a wide temperature range.

• Wall thickness: 3 mm to prevent collapse and kinks
• Working pressure approximately 43 PSI; burst up to 100–130 PSI depending on temperature
• Temperature range: -76°F to 392°F (-60°C to 200°C)

Can I use these hoses for automotive, marine, or DIY turbo/intake projects?

Yes—these silicone vacuum hoses are suitable for general-purpose air and water transfer in engine bays, marine systems, and fabrication projects like custom turbo piping or radiator bypass lines. They function as a durable replacement for OEM black rubber vacuum lines while maintaining a similar appearance.

• Common uses: vacuum lines, coolant bypass, boost/pressure sensing, breather tubes
• Suitable for automotive, marine, industrial, and home workshop tasks
• Works well with clamps, barb fittings, and silicone couplers for custom installs

How do I choose the correct size and install these hoses properly?

Match the inner diameter of the hose to the barb or fitting for a snug friction fit; tighter fits work best with small clamps for secure sealing. Measure the existing line or fitting before cutting, and use hose clamps or spring clamps where pressure or vibration could loosen the connection.

• Measure your existing tube or fitting diameter and choose the matching ID
• Cut cleanly with a sharp blade and slide over barbs until seated
• Use worm-drive or spring clamps on pressure or high-vibration lines

Who is this for: The Shineyoo Silicone Vacuum Tubing Hose Kit is ideal for mechanics, hobbyists, custom fabricators, and boat owners who need a variety of reliable silicone hoses on hand. If you perform routine maintenance, build performance plumbing, or undertake multiple small projects, this kit reduces trips to the parts store and gives flexible, high-temperature-rated tubing that stays intact under typical engine bay conditions.