SMART JERRY Cordless Fuel Transfer Pump 2.8 GPM — Battery-Powered, Double-Seal Leak Protection

The SMART JERRY Cordless Fuel Transfer Pump is a compact, battery-powered liquid transfer pump that moves gasoline, diesel, oil, kerosene and water at up to 2.8 gallons per minute without cords or complex setup.

Designed for garages, farms, boats and workshops, this handheld transfer pump runs on standard D or AA batteries (not included) and replaces messy manual siphons with fast, controllable flow. Its double-seal construction and precision nozzle reduce drips and help you move fluids cleanly between cans, tanks and containers. Lightweight and quick to install, the pump is made for users who need a portable, no-plug solution for fueling and fluid handling.

How fast will this pump transfer liquid compared to a manual siphon?

The SMART JERRY pump delivers a clear speed advantage over manual siphoning. With 6 AA batteries installed, the tested flow rate reaches approximately 2.8 gallons per minute; using 2 D batteries yields about 2 gallons per minute. That makes short work of filling jerry cans, small tanks or removing water from low-volume areas.

• Flow with 6 AA batteries: ~2.8 GPM (tested with water)
• Flow with 2 D batteries: ~2.0 GPM (tested with water)
• Faster than hand siphons and most small electric siphon pumps
• Suitable for quick transfers from cans, containers and small tanks

Is it safe and tidy to use around fuel and oil?

Safety and cleanliness are important when moving combustible or staining fluids. SMART JERRY built this model with a double-seal, industrial-grade leak protection system to cut down on drips and accidental spills. The single-hand flow-adjustment nozzle helps you start and stop flow precisely, reducing wasted liquid and cleanup time.

• Upgraded double-seal design to minimize leakage
• Precision flow-control nozzle for one-handed operation
• Simple attachment to cans and containers to limit splash and overfill
• Recommended for outdoor or well-ventilated use with flammable liquids

What liquids and containers can this pump handle?

This pump is engineered for a wide range of non-corrosive automotive and household liquids. It works well with gasoline, diesel, motor oil, kerosene and water, and is designed to draw from jerry cans, plastic or metal containers, small tanks and reservoirs. Avoid strong solvents or highly corrosive chemicals that can damage seals and internal components.

• Compatible: gasoline, diesel, engine oil, kerosene, water
• Container types: gas cans, 5-gallon cans, small tanks, buckets
• Not recommended for: aggressive acids, concentrated solvents, or abrasive slurries
• Batteries required but not included; use fresh cells for best performance

How easy is it to set up and maintain the pump?

The cordless design keeps setup minimal: insert batteries, attach the intake and discharge tubes to the container openings, and operate the nozzle. Routine care is limited to rinsing with a compatible fluid after use, checking seals, and replacing batteries when performance drops. No wiring, mounts or complex plumbing are necessary.

• Quick setup: battery insertion and hose attachment in minutes
• Maintenance: flush with water or appropriate cleaner after use
• Inspect seals periodically for wear and replace as needed
• Store dry and protected from prolonged UV and heat exposure

Who is this for? SMART JERRY's Cordless Fuel Transfer Pump is aimed at car owners, small-farm operators, marine users, DIYers and anyone who needs a portable, fast way to move fuel or water without a power cord. It suits people who value speed and simplicity over high-capacity industrial pumps — ideal for topping off tanks, transferring fuel from cans, removing small volumes of water, and other light-to-moderate fluid tasks.