Solary Automotive Smoke Machine Tester — 30s Rapid Smoke Output, Built-in 12V Pump for EVAP & Vacuum Leak Detection

The Solary Automotive Smoke Machine Tester produces dense diagnostic smoke in about 30 seconds to quickly locate EVAP, vacuum, and intake leaks. Whether you’re troubleshooting a stubborn check-engine light, confirming repair work, or preventing future driveability issues, this compact smoke tester is built to get a visual answer fast. A built-in 12V air pump removes the need for an external compressor, and the unit’s rapid warm-up and high-sensitivity smoke output let DIYers and small shops isolate hairline cracks and loose connections without guesswork.

How fast can I find a leak with this smoke tester?

The Solary tester generates thick visible smoke in roughly 30 seconds and usually pinpoints the leak source within a minute of introduction. Rapid output shortens troubleshooting time so you can identify the problem and move to repair quickly, instead of spending hours on trial-and-error checks.

• Thick smoke visible through vacuum lines and intake passages within 30 seconds
• Typical leak localization under 60 seconds after smoke flow begins
• Continuous output to trace slow or intermittent leaks

What vehicle systems will this machine test effectively?

This smoke machine is built to diagnose common automotive circuits including EVAP systems, intake manifolds, fuel line routes, throttle body connections, and vacuum hoses. Multiple adapters allow secure connections to varied ports so you can test several systems with one tool.

• EVAP canisters, purge lines, and charcoal canister hoses
• Intake manifold gaskets, throttle body seals, and vacuum fittings
• Fuel line joints and ancillary hose assemblies with included adapters

What makes it easy for a weekend DIYer to use?

Solary designed the unit for straightforward operation: connect to a 12V battery, add 10–20 ml of test oil, and start. The built-in pump removes the need for an external air source, cutting setup time and making leak testing practical in home garages.

• On-board pump for plug-and-play diagnostics—no compressor required
• Simple power hookup to a vehicle’s 12V battery or bench supply
• Low test fluid volume and intuitive controls for quick starts

Is the machine durable and safe for different climates?

The tester incorporates thermal protections to support reliable performance in a range of temperatures. Overheat safeguards activate near 75°C, while low-temperature protection helps maintain operation down to -20°C for colder work environments.

• Overheat protection guards internal components during heavy use
• Low-temperature protection helps maintain consistent smoke generation
• Compact, lightweight design (about 4.69 lbs) for easy positioning

Who is this for The Solary Automotive Smoke Machine Tester is aimed at home mechanics, hobbyists, and small repair shops who want a reliable, portable diagnostic tool to find elusive leaks. If you want to reduce diagnostic fees, shorten troubleshooting time, and visually verify repairs across EVAP, vacuum, and intake systems, this unit is calibrated to deliver clear results with minimal setup. It’s also useful for technicians needing a lightweight, fast-starting smoke source for routine inspections and post-repair confirmation.

FAQ

Q: How much power does the Solary smoke machine need?

A: It runs from a 12V DC supply—typically the vehicle battery—and requires no external air compressor.

Q: How much test fluid is required per session?

A: Most tests use about 10–20 ml of smoke test oil, enough for multiple quick inspections.