SONAX EX 04-06 Dual-Action Polishing Compound 250 ml — One-Step Medium Cut, High-Gloss DA Safe

SONAX EX 04-06 is a water-based, silicone-free one-step polishing compound made for dual-action polishers that removes swirls, oxidation and water spots while producing a high-gloss, hologram-free finish.

Built specifically for random orbital (DA) machines, SONAX EX 04-06 blends medium-cut abrasive power with a refined finishing action so you can correct paint defects and leave exceptional depth of shine in a single pass. Its diminishing abrasives break down evenly to minimize dust and reduce pad loading, and the formula contains no solvents, silicones, or petroleum—making it safe for professional environments and compliant with VOC regulations. Available in 250 ml (this listing), 1 L (item 242300) and 5 L (item 02425000).

How does SONAX EX 04-06 perform on swirls and light oxidation?

EX 04-06 uses advanced diminishing abrasives that attack moderate to light swirl marks and surface oxidation, then polish out to a clear, deep gloss. You’ll see visible defect removal without aggressive haze or long buffing stages, especially when used with the recommended pads.

• Medium-cut action rated 4 for cut and 6 for finish.
• Formulated to leave minimal residue and no silicone film.
• Works quickly with DA polishers for efficient correction.
• Reduces pad dust for easier cleanup and longer pad life.

Which tools and pads get the best results with this polish?

SONAX EX 04-06 is optimized for dual-action and random orbital polishers; it pairs best with foam or microfiber polishing pads. SONAX suggests orange polishing pads for stronger cutting and gray pads for finer finishing, but you can adapt pad choice to the level of defects on your paint.

• Use SONAX Orange Polishing Pad (493000) for more aggressive removal.
• Use SONAX Gray Polishing Pad (493241) for refined finishing passes.
• Apply moderate pressure and slow to medium pad speed for consistent results.
• Work small sections to control heat and ensure even abrasive breakdown.

Is this product safe for professional shops and different paint systems?

Yes — the water-based formula contains no silicones, fillers, or petroleum, which makes it suitable for body-shop use and safe across modern OEM and aftermarket paint systems when used as directed. Its VOC-compliant composition and lack of masking agents mean it corrects rather than hides defects.

• Silicone-free and VOC-compliant for regulated environments.
• Compatible with most clearcoats and OEM paints when tested first.
• Leaves a true finish without waxes or fillers interfering with further coatings.
• No dusting during polishing, simplifying post-polish cleanup.

How should I apply SONAX EX 04-06 for best finish and efficiency?

Apply a small amount to a divided panel, spread it at low speed, then increase speed and work the pad in overlapping passes until the polish diminishes. Wipe residue with a clean microfiber towel and inspect under good light; a second light pass with a finishing pad can further enhance gloss if needed.

• Start with 2–3 pea-sized drops per 5x5 inch area.
• Spread at low speed, then polish at moderate speed with moderate pressure.
• Remove residue with a soft microfiber cloth; avoid silicone-laden towels.
• Test on a hidden panel before wide application to confirm compatibility.

Who is this for: SONAX EX 04-06 is designed for detailers, bodyshop technicians, and car enthusiasts who want professional-level defect correction and high-gloss results using a DA polisher without resorting to multi-step systems. It’s ideal when you need efficient swirl and oxidation removal plus a refined finish in one step—especially useful for fleet upkeep, showroom prep, and seasonal rejuvenation of older paint.