SPTA 6" Buffing Polishing Pads — 6-inch 5‑Pad Foam Kit (T120–T10) with Hook-and-Loop, Washable

This kit combines heavy-cut, high-cut, moderate-cut, medium-cut and ultra-fine finishing foam pads so you can progress from paint correction to glossy finish without swapping brands. Each pad has a slightly larger front face (168 mm) and a 150 mm backing to reduce plate contact and protect delicate surfaces while improving compound retention and cooling. Pads are washable, reusable and built for common polishers including rotary, dual-action and random orbital machines.

How do these pads remove sanding marks and scratches?

Each pad in the set is calibrated to a removal level that matches common abrasive grits and defect severity. Start with the T120 heavy-cut pad for deep sanding marks and move down through the T80 and T60 to refine the finish, finishing with the T10 for gloss and swirl reduction.

• T120 green — heavy-cut for 1200/1500 grit marks, heavy oxidation and orange peel
• T80 yellow — high-cut for 1500/2000 grit defects and deeper swirls
• T60 blue — moderate-cut for mid-level defects and polishing transition
• T40 orange — medium-cut for fine scratches and 2000 grit refinement
• T10 red — ultra-fine finishing for wash scratches and high gloss

Will these pads fit my polisher and compounds?

The pads use a universal hook-and-loop 150 mm backing that works with most 6-inch backing plates on DA, RO and rotary polishers. Their open-cell foam accepts a wide range of compounds and retains product at speed, reducing sling and waste.

• Compatible with dual-action, rotary and pneumatic polishers
• Works with heavy-cut, medium-cut and finishing compounds
• Designed to lock compound to the pad to reduce fling at high RPM
• Special 168 mm face reduces plate abrasion and protects edges

How do I care for and reuse the pads safely?

Pads are washable and constructed from durable open-cell foam to withstand several detail jobs. Clean after each use to remove trapped abrasives and allow pads to dry naturally; periodic washing extends pad life and keeps polishing performance consistent.

• Rinse with clean water or use a pad-cleaning brush after each session
• Air dry fully before storage to prevent mildew and foam breakdown
• Inspect edges and backing; replace if glue or foam degrades
• Rotate pads between vehicles to avoid cross-contamination of compounds

What design features improve finish quality and control?

The pads combine a stepped diameter (bigger face, smaller backing) with open-cell construction to manage heat and compound transfer. That design reduces the chance of plate contact with paint edges while maintaining airflow for cooler polishing and consistent cutting action.

• Stepped shape: 168 mm face with 150 mm backing to protect paint edges
• Open-cell foam for improved airflow and heat dissipation
• High compound retention to minimize sling and waste
• Durable construction resists shear forces from DA and rotary polishers

Who this set is for: detailers, DIYers and professional shops who want a single, color-coded pad kit to take a damaged panel from heavy correction through final gloss. It’s suitable for automotive paints, resin and furniture surfaces where staged cut-to-gloss polishing is required. If you need pads that hold product, resist high-speed shear and are easy to fit to common 6" backing plates, this SPTA kit is a practical, reusable option.