SPTA 6-Inch Buffing Polishing Pads, 5-Grit Foam Set — Hook-and-Loop, Heat-Resistant Open-Cell

SPTA 6-inch HD buffing polishing pads are a five-grit foam pad set designed to cut, refine and finish automotive paint using dual-action, rotary or random orbital polishers.

This kit includes five color-coded foam pads ranging from heavy-cut to ultra-fine finishing, engineered to remove sanding marks, oxidation and swirl marks, then leave a high-gloss, low-haze finish. Each pad features a slightly oversized front face (6.5 in) with a 6 in backing for safer contact and better compound retention; the hook-and-loop backing makes swaps fast while the open-cell foam resists heat and sheds product appropriately for longer life.

How do these pads handle heavy defects and sanding marks?

The T120 green heavy-cut pad and T80 yellow high-cut pad are formulated to remove deep sanding marks and heavy oxidation when paired with an aggressive cutting compound. Use the heavy-cut first to tackle stubborn defects, then refine with the high-cut to reduce micro-marring before moving to finer pads.

• T120 green — removes 1200/1500 grit sanding marks and heavy oxidation.
• T80 yellow — eliminates 1500/2000 grit marks and heavy-to-medium swirl.
• Compatible with heavy and medium cut compounds for rotary or dual-action polishers.
• Open-cell foam dissipates heat to reduce surface risk during prolonged passes.

What pads should I use to refine and finish paint for gloss?

The T60 blue and T40 orange pads work as transitional steps to reduce light defects, while the T10 red pad delivers final gloss with minimal swirling. These pads are intended to progressively refine the paint until you reach the gloss level desired before applying sealant or wax.

• T60 blue — moderate-cut for 1500/2000 grit blending and medium oxidation.
• T40 orange — light cutting for 2000 grit marks and finer scratches.
• T10 red — ultra-fine finish pad for swirl-free high gloss.
• Pair with SPTA medium and finish compounds for best clarity.

Will these pads fit my polisher and how long will they last?

The pads use a standard hook-and-loop 6-inch backing with a 6.5-inch front face profile that fits most 6" DA, rotary and random orbital polishers and many pneumatic tools. Built from durable open-cell foam, they are washable and reusable; under typical detailing use each pad can cover multiple cars before showing significant wear.

• 6 in (150 mm) backing with 6.5 in (165 mm) front to protect edges.
• Compatible with DA, rotary, RO, GA polishers and some sanders.
• Washable with water and air dry; use a conditioning brush to extend life.
• Expected lifespan: multiple vehicles per pad depending on usage and product.

How do I get the best results and care for the pads?

Start with the coarsest pad needed, then step down progressively to finer pads, keeping moderate pressure and overlapping passes. Clean pads after use by rinsing and brushing; store dry to prevent breakdown and maintain compound retention and heat management.

• Sequence pads from T120 → T80 → T60 → T40 → T10 for staged correction.
• Use recommended SPTA compounds for consistent cut and finish balance.
• Rinse and brush pads after use; air dry fully before storage.
• Avoid excessive pressure or prolonged dwell to prevent heat buildup.

Who is this for: Detailers, DIY enthusiasts and body shop technicians who need a complete polishing progression in one kit. The SPTA 6" foam pad set suits anyone restoring painted surfaces, preparing panels after sanding, or seeking final high-gloss finishing — compatible with most 6-inch polishers and ideal for cars, motorcycles, furniture resins and similar projects where controlled cutting and refined finishing matter.