SPTA Foam Polishing Pads 5.5" (125mm) Yellow 3-Pack — High-Cut for DA/RO Polishers

SPTA Yellow T80 High-Cut Foam Polishing Pad is a 5.5-inch, high-density cutting pad designed to remove 1500–2000 grit sanding marks, swirls and medium-to-heavy oxidation while preparing surfaces for polishing or waxing.

This three-piece set of 125mm (5.5") high-cut foam pads is built for random orbital (RO), dual action (DA) and gear-driven (GA) polishers. The T80 yellow foam combines aggressive cutting with controlled finish characteristics so you can quickly remove defects without overly aggressive aggressiveness that ruins clearcoat. The pads use a ventilated groove pattern and high-quality Velcro backing to boost cooling, reduce heat buildup and make pad swaps quick and secure.

How does the T80 pad remove sanding marks and swirl marks?

The T80 foam has a high-cut density engineered to cut through 1500 and 2000 grit sanding scratches and moderate swirls. Its cell structure and foam firmness let polishing compound work efficiently without clogging, producing measurable defect reduction in fewer passes.

• High-density polyurethane foam for aggressive material removal
• Groove channels hold excess compound and improve air flow
• Optimized for use with medium and heavy-cut compounds
• Designed for RO, DA and GA polishers to maintain control

Will these pads overheat the paint or fall apart under heavy use?

The pads include vents and grooves that accelerate air circulation and disperse working heat, decreasing the risk of overheating or adhesive failure. Durable foam and reinforced Velcro make the pads resilient under continued use; cleaning and compound management extend life further.

• Grooved design reduces heat buildup during polishing
• High tensile-strength foam resists tearing and compression
• Quality Velcro backing prevents slippage and heat-related detachment
• Recommended to clean pads when abrasive buildup occurs

What surfaces and tasks are these pads best suited for?

These yellow T80 pads are versatile for compounding, polishing and waxing on automotive and marine finishes, and they can be used on glass and other hard surfaces with appropriate compounds. They’re ideal when you need rapid defect removal followed by refinement with softer pads.

• Removes sanding marks, medium-to-heavy oxidation, and swirls
• Works well for compounding before finishing with finer pads
• Suitable for cars, boats, and other painted or clearcoated surfaces
• Can be paired with SPTA heavy or medium-cut polishing compounds

How do I care for and prolong the life of the pads?

Routine cleaning and avoiding solvent or alkaline cleaners keeps the foam flexible and effective. Remove excess abrasive regularly during use, wash gently after sessions, and store dry to prevent breakdown of the foam and backing.

• Clean pads after use; remove compound buildup during polishing
• Avoid harsh solvents and alkaline cleaners when washing
• Allow pads to dry fully before storage to prevent odor or degradation
• Use proper backing plates (125mm) and avoid excessive pressure for longer life

Who is this for: Detailers, DIY enthusiasts and professional car-care technicians who need an aggressive yet controllable cutting pad for medium-to-heavy correction. If you regularly remove sanding marks, heavy swirl patterns or oxidation and plan to follow with finer finishing pads, the SPTA Yellow T80 5.5" set gives a reliable balance of cutting power, heat management and durability.