SPTA Glass Polishing Pads 6-inch (150mm) 5-Pack Microfibre Buffing Discs — Water Spot & Light Scratch Removal

SPTA 6" microfiber glass polishing pads are a five-piece kit designed to restore shine and reduce scratches, water spots and stubborn residues on automotive glass and small screens.

This set pairs soft, high-elasticity microfiber pads with rotary or dual-action polishers to deliver controlled abrasion across windshields, side windows, camera lenses and phone screens. The pads are built to flex with the surface, minimize heat and friction, and work with fine glass polishes or compounds to lift contaminants without gouging the substrate. Each pad attaches to a standard 150mm backing plate and is reusable when cleaned properly.

How do these pads remove water spots and light scratches?

The microfiber face uses a dense, unique fiber blend that provides micro-abrasion while dispersing polishing compound evenly. Used with a fine glass polish, the pad abrades and carries away mineral deposits and very fine surface defects rather than pushing them around.

• Microfiber surface for consistent polish delivery
• High elasticity reduces pressure hot spots
• Works with fine glass polish and light abrasives
• Safe for repeated passes without aggressive cutting

Will these pads fit my polisher and how are they attached?

Each pad is sized for a 6-inch (150mm) backing plate, the common standard for many rotary and dual-action polishers. The pads typically use hook-and-loop (Velcro) backing for quick mounting and removal, making them compatible with most aftermarket backing plates.

• 150mm diameter matches standard backing plates
• Hook-and-loop interface for secure attachment
• Works with most dual-action and rotary tools
• Easy to swap between pads during multi-step polishing

How should I use and maintain these polishing discs?

Start with a small amount of fine glass polish and low-to-medium speed, keeping the pad flat and moving in overlapping passes. After use, rinse the pad with warm water and a mild cleaner or use a pad-cleaning tool; allow it to air dry fully before storage to preserve elasticity and performance.

• Apply polish sparingly to avoid sling and glazing
• Keep tool speed steady and use light to moderate pressure
• Rinse and comb fibers or use foam/microfiber cleaner between sessions
• Air dry away from direct heat to maintain shape

What surfaces and scenarios are these pads best suited for?

These pads are optimized for glass surfaces—automotive windows, mirrors, small lenses and flat screen panels—but can also be used gently on clear-coated paint for final polishing steps or wax application. They excel at removing water spots, light etching and polishing residue without aggressive cutting.

• Windshields and side windows with mineral staining
• Camera lenses, phone screens and small glass panels
• Finishing steps on clear coats and applying waxes
• Detailing tasks where minimal surface removal is needed

Who is this for? Detailers, DIY car owners and electronics refurbishers who need a reliable, reusable microfiber pad for controlled glass restoration will benefit from this SPTA 5-pack. It’s especially useful for people who want a gentle but effective tool to address water spotting, light scratch removal and final polishing, while keeping costs down with washable pads and a standardized 6" size that fits common polishers.