Spurtar Battery Quick Disconnect 175A Plug Set — 4-Pack Red, 12–36V 1/0 Gauge Fast-Connect

The Spurtar 175A Battery Quick Connect/Disconnect 4-pack is a heavy-duty 12–36V plug set that lets you rapidly connect or disconnect 1/0 gauge battery cables for winches, trolling motors, chargers and other high-current accessories.

Built for frequent field use, these red Spurtar battery connectors handle up to 175 amps and accept 1/0 wire (22mm²–50mm²). Each kit includes four housings, eight copper terminal pins and four dust caps to protect contacts when not in use. The assemblies are rated to resist corrosion, can be crimped or soldered, and are suitable for applications from vehicle charging and pallet forks to marine and off-road recovery equipment.

How does this connector simplify swapping batteries and accessories?

The Spurtar quick disconnect eliminates the need to repeatedly reterminate cables or use bulky screw connections. You prepare the terminal pins once by crimping or soldering to your 1/0 cable, then slide them into the housing for fast plug-in and removal in the field.

• Insert prepared 1/0 (22–50 mm²) cables into terminal pins, crimp or solder for a permanent joint.
• Push pins into the plug housing until they lock; no separate male/female parts required.
• Use the included dust covers to keep moisture and dirt off contacts between uses.

What electrical limits and safety features should I expect?

These connectors are rated for 12–36V DC operation with a continuous capacity of 175 A and a maximum withstand voltage up to 600 V. The housings include corrosion-resistant copper contacts and two hard anti-flame boots to protect the wiring and reduce exposure to contaminants.

• 175 ampere live plugging/unplugging rating for heavy loads like winches and motors.
• 600 V maximum withstand voltage for added insulation margin.
• Copper contacts resist corrosion and accept crimp or solder terminations.

Which applications are these connectors best for?

Spurtar connectors are versatile for both recreational and industrial uses: they’re commonly used with trolling motors, winch systems, vehicle chargers, forklifts, pallet forks and portable battery setups. The 1/0 gauge compatibility and 175 A rating match many medium- to high-current accessories.

• Trolling motors and marine battery packs where quick removal is routine.
• Winch recovery kits and off-road rigs requiring robust current handling.
• Charging stations, forklift batteries, pallet fork connections and workshop power tools.

How do I install and maintain the Spurtar quick disconnects?

Installation is straightforward: strip the cable, crimp or solder onto the supplied terminal pins, then insert each pin into the housing until it seats. Periodic inspection and cleaning of contacts plus use of the dust caps will extend service life and maintain reliable conductivity.

• Strip 1/0 gauge cable to the recommended length, crimp or solder the terminal pin securely.
• Insert pins into the housing until they lock; verify correct seating by a light tug.
• Fit dust caps when unused and inspect for corrosion; replace pins if heavily worn.

Who is this for? The Spurtar 175A quick disconnect set suits DIY mechanics, boat owners, off-road enthusiasts and light industrial operators who need reliable, repeatable high-current connections without rewiring. If you work with 1/0 gauge battery cable and want a durable, easy-to-use connector for winches, chargers, trolling motors or portable battery systems, this four-pack provides spare housings, terminals and dust covers so you can outfit multiple rigs or keep replacements on hand.