TYT Synthetic Winch Rope Kit — 3/8" x 92' Black, 27,000 lb UHMWPE Rope with Protective Sleeve & Heavy-Duty Hook

TYT's Synthetic Winch Rope Kit is a 3/8" x 92' ultra-high molecular weight polyethylene (UHMWPE) braided rope rated to 27,000 lbs with a protective sleeve, heavy-duty hook and reflective pull strap for safer off-road recovery.

This winch replacement kit bundles a high-strength 12-strand synthetic rope with accessories designed for everyday off-road use. The rope is engineered to be lightweight and easier to handle than steel cable while providing a high breaking strength. Included are a heavy-duty hook, a reflective safety pull strap for hands-free attachment and a UV- and chemical-resistant sleeve to shield the rope from abrasion, sunlight and heat during recoveries.

How does this rope compare to traditional steel cable?

The TYT synthetic rope is much lighter and easier to manage than steel cable while offering high tensile strength and safer failure modes. Synthetic fibers do not store the same kinetic energy as steel; they tend to snap back less violently and are easier to splice and secure.

• 12-strand UHMWPE construction for low stretch and high strength
• 27,000 lb nominal breaking strength vs. comparable steel weight advantage
• Reduced risk of sharp recoil compared to steel cable
• Spliced end avoids sharp wraps and abrasive fittings

What protective features keep the rope working longer?

A durable nylon protective sleeve comes with the rope to guard against abrasion, UV exposure and chemical contact that typically degrade synthetic lines. The sleeve minimizes direct friction on the rope during winching and helps maintain working strength over many cycles.

• 1.5 m nylon sleeve resists sunlight and chemicals
• Red double-braided end highlights splice area and prevents over-extension
• Protects against heat buildup at contact points
• Easy to slide into position over the rope during use

What do I get in the kit and how do I install it safely?

The kit includes the 3/8" x 92' synthetic rope, a heavy-duty winch hook rated at 35,000 lbs, and a reflective safety pull strap for clear attachment. Installation requires splicing or securing the rope to your winch drum according to your winch manufacturer's instructions and keeping the red double-braided section partially engaged to avoid full extension.

• 3/8" x 92' synthetic rope, 27,000 lb breaking capacity
• Heavy-duty hook (35,000 lb rating) for secure anchoring
• Reflective safety pull strap for handling and visibility
• Follow manufacturer winch spooling and tensioning steps; do not fully extend red braided end

How should I care for the rope between uses?

Routine inspections and basic maintenance substantially extend service life. Rinse mud and grit off after recoveries, keep the protective sleeve in place over contact points, and store the rope dry and out of direct sunlight.

• Inspect for fraying, abrasion or chemical damage before each use
• Wash with fresh water to remove dirt and salt; air dry completely
• Store coiled in a dry, shaded area away from direct UV exposure
• Replace rope if core integrity or splice is compromised

Who is this for? The TYT Synthetic Winch Rope Kit is built for off-road enthusiasts, overlanders, utility operators and anyone who needs a lighter, safer alternative to steel cable for vehicle recovery. It's suitable for owners of 4x4s, ATVs, UTVs, trucks and boats who want a high-strength, easy-to-handle rope with protective accessories for repeated recoveries. If you perform regular winching and want a durable, serviceable rope with visible safety features and a heavy-duty hook, this kit provides the components you need to upgrade your winch setup.