VEVOR Boat Trailer Winch Stand with 1200 lb Winch and 25 ft Strap — Galvanized Roller

VEVOR's boat trailer winch stand is a galvanized winch post assembly with a 1200 lb hand winch, 25 ft strap, and roller to safely load and secure small boats and personal watercraft on compatible trailer tongues.

This heavy-duty winch post is made from 3 mm hot-dip galvanized steel and ships with a U-bolt, large roller, safety hook, and an adjustable post height, giving boat owners a corrosion-resistant mounting option designed for frequent exposure to freshwater and seawater. The unit arrives with a preinstalled 1200 lb / 544 kg winch and a 2 in x 25 ft polyester strap so you can start using it right away. It fits trailer tongues measuring roughly 2–3 inches wide by 3–4 inches high and aims to reduce friction, stabilize loads, and simplify launch and retrieval tasks.

How does this winch stand help when loading a boat?

The roller and strap combination reduces drag on the hull during loading, while the 1200 lb winch supplies the pulling force needed for most small to mid-size boats. The built-in safety hook and sturdy mounting U-bolt keep the bow secured throughout winching and transport.

• Large 5.1-inch polyurethane roller minimizes hull rubbing and guides the bow.
• 1200 lb manual winch supports pulling and tension control for easy retrieval.
• Bottom security rope hook provides a secondary anchor for added safety.
• Galvanized finish resists corrosion from saltwater exposure.

Will this mount fit my trailer tongue and boat size?

The included U-bolt and the post profile are sized to clamp onto trailer tongues approximately 2–3 inches wide by 3–4 inches high, and the post adjusts in height to match different bow heights. The 1200 lb rating and 25 ft strap are suited for jetskis, small sailboats, and many speedboats, but always check your boat’s dry weight and safe winching practices.

• U-bolt included for 2–3" W x 3–4" H tongues—no extra adapter required for these sizes.
• Adjustable height from 14.3 to 21.6 inches to align with varying bow heights.
• 25 ft polyester strap gives long reach for most trailers and loading positions.
• 1200 lb (544 kg) rated winch—appropriate for light to medium craft.

How durable and weatherproof is the winch stand?

Constructed from 3 mm hot-dip galvanized steel, the winch post holds up to wet and salty environments better than standard painted steel. The galvanization helps prevent rusting over time, and the roller uses resilient material to resist wear from repeated contact with hulls.

• 3 mm hot-dip galvanized steel resists corrosion in marine conditions.
• Large roller built to withstand repeated contact and reduce wear.
• Galvanized hardware helps maintain structural integrity during long-term use.
• Simple mechanical winch with robust gearing for dependable service.

How easy is installation and routine use?

Installation is straightforward: clamp the post to the trailer tongue with the supplied U-bolt, adjust the post height, and secure the winch strap. Routine operation is manual and intuitive—pull strap through the roller, hook the safety rope, and crank the winch, using the bottom hook as a backup anchor when needed.

• U-bolt mounting eliminates complex welding or drilling for supported tongue sizes.
• Preinstalled winch and strap reduce setup time out of the box.
• Adjustable post height accommodates changes without removing the mount.
• Simple maintenance: rinse with fresh water and inspect galvanization after saltwater exposure.

Who this is for: boat owners, trailer rental businesses, and water-sports enthusiasts who need a reliable, corrosion-resistant winch post for small to medium craft. Choose this VEVOR winch stand if you want a ready-to-install assembly with a powerful manual winch, a long strap, and a large roller to make launching and retrieving safer and easier on a trailer tongue that matches the specified dimensions.